OEM Makita Band Saw Parts & Accessories

Hex. Socket Head Bolt M6x12

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 922312-0

This is a genuine manufacturer-sourced replacement bolt which is specially designed for use with Makita saws. It is a standard hardware which has multiple uses depending on the model of your unit, please make sure to check appropriate diagrams of your unit for the correct location and use of this item. This high-quality hex socket head bolt is made of durable metal and it is sold individually.

Hex Socket Head Bolt

★★★★★

(2)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 251981-3

Authentic replacement bolt designed for use with Makita power tools. It is a standard bolt which has multiple uses based on a tool. Please refer to appropriate diagrams for correct application. This is a hex socket head bolt, so you would need a hex key/allen wrench in order to secure or loosen it. It is sold individually.

Stopper Plate

★★★★★

(1)

$6.82

Manufacturer Part Number:: 345467-8

This part is an OEM from Makita. The stopper plate is compatible with many band saw models. This metal component is fastened to the gear housing, holding the project material in place for cutting. For the repair, you will need a hex key and a pair of pliers. The stopper plate is sold individually.

Ball Bearing

★★★★★

(2)

$10.03

Manufacturer Part Number:: 210033-9

This Ball Bearing is shielded on both sides. It is a genuine Makita replacement part and is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experien...

Rubber Tire

★★★★★

(3)

$24.14

Manufacturer Part Number:: 421333-4

Genuine Manufacturer Approved replacement Wheel Tire for some Makita Bandsaws. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually ...

Flat Washer 4

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 941051-3

This is an authentic replacement part manufactured Makita power tools. The flat washer is commonly used to disperse pressure across a wider area on a part assembly that is applied by a nut or bolt. This flat washer is used with multiple types of power tools, please see model diagram for part location and usage. The flat washer is sold as an individual replacement part.

Switch Sgel215c

★★★★★

(4)

$46.62

Manufacturer Part Number:: 651225-5

This is a Trigger switch that has 4 leads and a locking mechanism for the trigger. This authentic Makita replacement part is sold individually. Switches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will...

H.s. Head Bolt M6x18

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 265484-1

This is an authentic manufacturer-sourced part that is specially made for use with Makita equipment. It is a standard hardware which may have multiple applications, unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Keep in mind this high-quality bolt is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams...

Rubber Tire

★★★★★

(4)

$6.16

Manufacturer Part Number:: 424589-8

This high quality rubber tire is a genuine OEM sourced item that is utilized on Makita band saws. It is secured over the wheel drives the blade to provide traction. Over time these rubber tires stretch and harden allowing blade to slip. When putting the new tire on a band saw wheel it may seem too small however it really is not. These tires will typically come approximately two or more inches smal...

Flat Washer 6

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 941152-7

This is an authentic manufacturer sourced replacement part. It is commonly used on a variety of Makita power tools. It is used to distribute the pressure evenly between two connected parts. Since this washer is a standard hardware that has multiple applications, it is recommend to check appropriate diagrams for correct location and use of it. This part is made out of metal and it is sold individually.

Switch Sgel 115cdy-6

$34.08

Manufacturer Part Number:: 651284-9

This is an OEM replacement part used with Makita sanders/routers. This switch is what allows user to turn the unit on and off. It is plastic a plastic switch with metal terminals. Over time mechanical moving components of a switch will begin to fail requiring a replacement. Please note this item is sold individually. To complete this repair you will need a screwdriver. • Remove housing • Dis...

Cord Guard 8

$6.16

Manufacturer Part Number:: 682572-3

This is an OEM part direct from the original manufacturer. The Makita cord guard 8 is made of durable rubber, and is compatible with various power tools. This item is often fastened into the housing and over the power cord, providing protection to the cord. The cord guard 8 is sold individually. A hex key and a screwdriver are helpful for the removal and repair. Please refer to the specific manual...

Makita Band Saw Parts

Top Makita Band Saw Models

Popular Makita Band Saw Parts

Makita Band Saw Models

Makita Band Saw Parts

Search By Model or Part Number

Top Makita Band Saw Models

Popular Makita Band Saw Parts

Makita Band Saw Models