OEM Black and Decker Band Saw Parts & Accessories

BRUSH & RETAINER ASY – Part Number: 874289

$16.68

Manufacturer Part Number:: 874289

Genuine Porter Cable replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of t...

BEARING

$21.03

Manufacturer Part Number:: 803858

This needle roller style bearing is an OEM part. It is commonly found in band saws produced by Porter Cable, DeWALT, and Black & Decker. Bearings are used to diminish friction between moving parts while also securing rotational angle. They need replacing fairly often because of this high wear role. Sold separately.

SWITCH

★★★★★

(8)

$33.90

Manufacturer Part Number:: N224532

This Trigger switch has 4 terminals and a locking mechanism on the trigger. This authentic Porter Cable replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will d...

Guide

★★★★★

(16)

$25.90

Manufacturer Part Number:: 1341607

Genuine Delta replacement part, this item is sold individually. The purpose of the 1341607 Guide is to keep the Bandsaw blade in a straight line to obtain accurate cuts. As the blade wears down the guide it can be moved forward to compensate for the wear. Over time the guide will have to be replaced It is advised to replace all four at this time.

WASHER

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 863134

This authentic manufacturer-sourced component is specially designed for use with Black and Decker, Porter Cable and DeWALT equipment. It helps to provide a tight seal between connected parts. This part provides an identical replacement for a missing or a faulty hardware that was included with a new unit. Please make sure to check the appropriate diagrams of your model for the exact location and ap...

Tire

★★★★★

(12)

$123.02

Manufacturer Part Number:: 1341591

Genuine Delta Wheel Tire for Bandsaws. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubbe...

WASHER

★★★★★

(2)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 803435

This is a genuine OEM sourced replacement part which is specially designed for use with portable band saws. It helps to distribute the pressure evenly and provide a tight seal between the connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable composite mat...

Washer

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 5140010-69

It is a genuine manufacturer sourced replacement washer that is specially produced for use with power equipment. The purpose of a washer is to distribute the pressure evenly between two connected parts. This is a standard hardware which has multiple applications based on your equipment, please refer to appropriate diagrams for correct location and use of this hardware. This part is made from durab...

SS/A HANDLE SET

★★★★★

(11)

$18.44

Manufacturer Part Number:: A03070

This is a Genuine OEM Sourced replacement part designed for use with Sanders and Band Saws. This item is made out of Plastic and it is Sold Individually. It includes Two (2) Pieces of the Knob. Please note the Screw used to secure this Knob is Sold Separately.

Cord/10ft./18-3

★★★★★

(2)

$33.43

Manufacturer Part Number:: 36480-98

This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 10 Feet Long

Washer

★★★★★

(1)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 5130830-00

This is a genuine OEM replacement part used on a variety of saws. It helps to distribute the pressure evenly and provides a tight seal for the connecting pieces inside the reel. It has multiple applications based on your tool. This part is made out of metal and it is sold individually. To replace it you would need a screwdriver.

CORD

★★★★★

(9)

$37.79

Manufacturer Part Number:: 879182

This cord is a genuine Porter Cable replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 7 Feet Long • Porter Cable models: 6302 T4, 6902 T5, T6

Black and Decker Band Saw Parts

Top Black and Decker Band Saw Models

Popular Black and Decker Band Saw Parts

Black and Decker Band Saw Models

Black and Decker Band Saw Parts

Search By Model or Part Number

Top Black and Decker Band Saw Models

Popular Black and Decker Band Saw Parts

Black and Decker Band Saw Models