Porter Cable Orbital or Palm Sander Parts
We sell only genuine OEM Porter Cable ® parts.
Top Porter Cable Orbital or Palm Sander Models
-
Porter Cable 382 (Type 2) 5 Palm Grip R.O.Sander Orbital Or Palm Sander Parts
-
Porter Cable 333K (Type 5) 5In Ros W/Sapa Case Orbital Or Palm Sander Parts
-
Porter Cable 7435 (Type 1) Random Orbit Polisher Orbital Or Palm Sander Parts
-
Porter Cable 340K (Type 1) 1/4 Sht Sndr W/Case Orbital Or Palm Sander Parts
-
Porter Cable 332K (Type 3) Palm Grip Psa Ros Orbital Or Palm Sander Parts
-
Porter Cable PTS5 (Type 1) 5" Pneumatic Random Orbit Sander Orbital Or Palm Sander Parts
-
Porter Cable PTS6 (Type 1) 5" Pneumatic Random Orbit Sander Orbital Or Palm Sander Parts
-
Porter Cable PTS7 (Type 1) 6" Pneumatic Random Orbit Sander Orbital Or Palm Sander Parts
Popular Porter Cable Orbital or Palm Sander Parts
- Manufacturer Part Number:
- 445861-25
(Sold Individually)
This motor brush is for grinders.
The motor brush transfers electric current to the spinning armature in the motor.
Unplug the grinder before installing this part. Wear work gloves to protect your hands.
- Manufacturer Part Number:
- 903373
This small belt controls the random orbit functions of common Porter-Cable palm sanders. If this belt breaks, the sanders will operate poorly and the pad will rotate at a high rate of speed. Sanding functions will be disabled. This belt is a genuine Porter-Cable replacement part. Removing the sanding pad and replacing this belt is an easy repair. This belt is compatible with the Porter Cable ...
- Manufacturer Part Number:
- 151553-00
Genuine OEM replacement part, this item is sold individually. The 151553-00 Dust Seal/Brake is a dual propose part. It is a Dust Seal to help prevent dust and debris from entering the motor assembly. It also acts as a Brake to keep the sanding pad at lower RPM so the sander will work properly. It is a good idea to replace this part when you are replacing the sanding pad.
- Manufacturer Part Number:
- 56194-00
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness.
There are many causes for O-Ring failure. The most common among power tools are:
• Extrusion and Nibbling - The O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off...
- Manufacturer Part Number:
- 286181-00
This item is an authentic, OEM sourced replacement part that is intended to be used with random orbital sanders from DeWalt, Black & Decker, and Porter Cable. The retainer is used to support the bearing between the fan and the sanding pad. This item is available as an individual replacement part.
- Manufacturer Part Number:
- 603637-00
Genuine OEM replacement part designed for certain Random Orbit Sanders. This item is made out of Metal and it is Sold Individually. This is the bottom Bearing Retainer that keeps the bearing in place. It is attached to the fan with 3 screws which are Sold Separately.
- Manufacturer Part Number:
- 445860-00
This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.
- Manufacturer Part Number:
- 605040-15
Genuine OEM sourced replacement part used on a variety of power tools. Ball bearings are used to reduce friction between rotating parts. Bearings experience constant wear when the tool is in operation, because of this they need to be periodically checked and replaced if needed. This part is made out of metal and it is sold individually. Included in part number 381004-00 spindle assembly.
- Manufacturer Part Number:
- 605040-05
This is an OEM replacement part used on on a variety of electric power tools. This is a standard ball bearing which is has multiple applications based on your tool. Bearings are designed to reduce friction between two rotating parts. Since bearings experience constant wear from pressure, heat and friction, eventually they would need to be replaced. This is sealed metal bearing and it is sold individually.
- Manufacturer Part Number:
- 876691
This 5" sander pad is a genuine OEM replacement part that is specially made for Porter Cable random orbit palm sanders. It is used to secure the hook and loop PSA style sandpaper, over time this part will wear out and it will need to be replaced. Changing the pad is an easy task that will only require a screwdriver.
- Manufacturer Part Number:
- 151281-08
The 151281-08 Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes.
Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper)
Applying too much pressure on the sander may cause premature wear on the Hook and Loop pad.
When a pad needs to be replaced, simpl...
- Manufacturer Part Number:
- 656494-00
Porter Cable Orbital or Palm Sander Models
-
Porter Cable 382 (Type 2) 5 Palm Grip R.O.Sander Orbital Or Palm Sander
-
Porter Cable 333K (Type 5) 5In Ros W/Sapa Case Orbital Or Palm Sander
-
Porter Cable 7435 (Type 1) Random Orbit Polisher Orbital Or Palm Sander
-
Porter Cable 340K (Type 1) 1/4 Sht Sndr W/Case Orbital Or Palm Sander
-
Porter Cable 332K (Type 3) Palm Grip Psa Ros Orbital Or Palm Sander
-
Porter Cable PTS5 (Type 1) 5" Pneumatic Random Orbit Sander Orbital Or Palm Sander
-
Porter Cable PTS6 (Type 1) 5" Pneumatic Random Orbit Sander Orbital Or Palm Sander
-
Porter Cable PTS7 (Type 1) 6" Pneumatic Random Orbit Sander Orbital Or Palm Sander
-
Porter Cable PCCW205B (Type 1) Pc 5-In 20-Volt Ros Orbital Or Palm Sander
-
Porter Cable PTS3 (Type 1) 5" Pneumatic Random Orbit Sander Orbital Or Palm Sander
-
Porter Cable PTS8 (Type 1) 6" Pneumatic Random Orbit Sander Orbital Or Palm Sander
-
Porter Cable PTS4 (Type 1) 5" Pneumatic Random Orbit Sander Orbital Or Palm Sander
