OEM Porter Cable Belt or Drum Sander Parts & Accessories

$13.84

Manufacturer Part Number:: A23158

This is a genuine Porter Cable replacement part, it is sold individually. The purpose of the A23158 Dust Bag is to pick up dust and debris when using the Belt Sanders listed below. It is connected to the spout at the top of the Belt Sander Housing.

SHOE ASSY

★★★★★

(6)

$51.48

Manufacturer Part Number:: 908910

Genuine Porter Cable replacement part, this item is sold individually. The 3" Shoe Assembly attaches to the base of the 3 X 24 Belt Sanders listed below, The purpose of this part is to allow the sanding belt run against it, it helps to create a smooth flat sanded surface. It includes the metal platen cork & three mounting screws. Over time the platen and cork will start to wear. It should be replaced ASAP then.

CORK & SHOE ASSY.

★★★★★

(19)

$22.41

Manufacturer Part Number:: 903400

Genuine Porter Cable replacement part, this item is sold individually. The 3" Shoe Assembly attaches to the base of the 3X21 Belt Sanders listed below. The purpose of this part is to allow the sanding belt run against it, it helps to create a smooth flat sanded surface. It includes the metal platen cork & two mounting screws. Over time the platen and cork will start to wear. It should be replaced ASAP then.

CARBON BRUSH WITH SPRING

★★★★★

(4)

$11.79

Manufacturer Part Number:: N778654

Genuine Porter Cable replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of t...

SS/A HANDLE SET

★★★★★

(11)

$18.44

Manufacturer Part Number:: A03070

This is a Genuine OEM Sourced replacement part designed for use with Sanders and Band Saws. This item is made out of Plastic and it is Sold Individually. It includes Two (2) Pieces of the Knob. Please note the Screw used to secure this Knob is Sold Separately.

SHOE ASSY

★★★★★

(8)

$57.05

Manufacturer Part Number:: 908909

Genuine Porter Cable replacement part, this item is sold individually. The 4" Shoe Assembly attaches to the base of the 4x24 Belt Sanders listed below. The purpose of this part is to allow the sanding belt run against it, it helps to create a smooth flat sanded surface. It includes the metal platen cork & three mounting screws. Over time the platen and cork will start to wear. It should be replace...

BEARING,NEEDLE

★★★★★

(1)

$25.04

Manufacturer Part Number:: 804211

This is a genuine replacement steel bearing from original manufacturer. It is commonly used in Porter Cable and Black & Decker belt sanders. Bearings are parts which separate metal parts to ease in movement and reduce friction. They also stabilize and prevent incorrect direction/tilt during movement. These high-wear parts are replaced regularly. This part is sold individually. Washers etc. sold separately.

BRUSH & SPRING

★★★★★

(5)

$10.73

Manufacturer Part Number:: N031635

Genuine Porter Cable replacement part includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear ite...

SWITCH

$37.55

Manufacturer Part Number:: 395373-04

This is a genuine manufacturer-approved replacement switch which is specially designed for use with Porter Cable belt sanders. It is the part of the tool handling on/off and variable speed operations, over time mechanical switches tend to wear out and may begin to fail eventually requiring replacement. Please note this high-quality plastic body switch is sold individually.

Switch

★★★★★

(9)

$38.26

Manufacturer Part Number:: 5140112-36

This is a Genuine OEM Approved replacement part used on Porter Cable Sanders. This switch has a Plastic Body and it includes Metal Screws and Terminals. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screw...

KNOB

★★★★★

(1)

$6.16

Manufacturer Part Number:: 897159

Genuine OEM replacement part used on Belt Sanders. it is Sold Individually. This part consists of a Plastic Knob with a Metal Threaded Shaft. This part in conjunction with a Spring will allow you to Adjust Belt Tracking by turning the Knob in either direction until the edge of the belt is even with the outer edge of the rear rubber-covered pulley. Replacing this part is very easy and it does not ...

GEAR

$44.90

Manufacturer Part Number:: 896468

This part is an OEM from the Porter Cable manufacturer. The metal gear is compatible with many belt sander devices. The gear is fitted between the nut and the ring, helping to rotate the drive belt. A screwdriver is needed in the repair. This component is sold individually.

Porter Cable Belt or Drum Sander Parts

Top Porter Cable Belt or Drum Sander Models

Popular Porter Cable Belt or Drum Sander Parts

Porter Cable Belt or Drum Sander Models

Porter Cable Belt or Drum Sander Parts

Search By Model or Part Number

Top Porter Cable Belt or Drum Sander Models

Popular Porter Cable Belt or Drum Sander Parts

Porter Cable Belt or Drum Sander Models