Delta Shaper Parts
We sell only genuine OEM Delta ® parts.
Top Delta Shaper Models
-
Delta SH100 (Type 1) Bench Shaper Parts
-
Delta SH100 Sh100 Shaper Parts
-
Delta 36-856 (Type 1) Stock Feeder Shaper Parts
-
Delta 36-865 (Type 2) Stock Feeder Shaper Parts
-
Delta 43-355 Shaper Parts
-
Delta 43-386 (Type 1) Wood Shaper Parts
-
Delta 43-792 (Type 1) Industrial Shaper Parts
-
Delta 43-384 (Type 2) Wood Shaper Parts
Popular Delta Shaper Parts
- Manufacturer Part Number:
- 927030102650S
The key attaches to the shaft and is made out of metal. This item is available individually. This is a genuine replacement part sourced from the original manufacturer for use with saws, drills, jointers, and shapers made by Delta. When replacing this part a set of pliers might be required during the installation process. It will require replacing if it becomes bent or broken.
- Manufacturer Part Number:
- 905010102732S
This is an authentic Delta replacement part sourced directly from the manufacturer. The roll pin is found in several different machines from Delta. This part is made of metal, and is put to different uses in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct part. This part is sold individually.
- Manufacturer Part Number:
- 920040107273
It is an authentic item that is supplied directly from original equipment manufacturer for use with Delta power equipment. This replacement bearing helps to secure the spindle while allowing it to rotate with minimal friction. For correct location and use of this item make sure to check appropriate diagrams of your equipment. Please note this durable metal bearing is sold individually.
- Manufacturer Part Number:
- 1340360
The roller attaches to the cover with the washer and the cap screw. This part is an OEM from Delta for use in stock feeder shapers. It is made out of metal and hard rubber and will need to be replaced if it stops turning. An allen wrench will be needed to replace this wheel. Keep in mind that this part is available as an individual replacement even though multiple rollers may be needed.
- Manufacturer Part Number:
- 488871-00
This genuine manufacturer-sourced screw is made for Delta, Black and Decker and Porter Cable equipment. The nut is a standard hardware which may have multiple applications. Check the diagrams for your specific model to ensure the exact location and use of this part. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. One durable metal nut is include...
- Manufacturer Part Number:
- 1340496
- Manufacturer Part Number:
- 1345226
This is an authentic replacement part manufactured for use with Delta table saws and routers. The miter gauge is used to change the angle of the cut. This miter gauge is as complete part assembly and is sold as an individual replacement part.
- Manufacturer Part Number:
- 406030330001S
This handle is an OEM direct from Delta. The handle is made for use with a variety of power tools. The metal handle allows the operator to make the needed adjustments for projects. This handle is sold individually. A screwdriver, pliers, socket and wrench set are often required for the proper installation. Please refer to the specific manual for further repair instructions.
- Manufacturer Part Number:
- 902012931513S
This is available as an individual replacement part. The keps nut attaches to the bracket and is made of metal. During replacement, it may require a wrench set to help install this item correctly. It will require replacing if it becomes broken. This is a genuine Delta replacement part used in compatible table saws, unisaws, and band saws.
- Manufacturer Part Number:
- 902010101300S
This is an original Delta replacement part manufactured for use with drill presses and table saws. The special hex nut has multiple applications depending on the model drill press or table saw. This hex nut is sold as an individual replacement part, please see model diagram for part location and usage.
- Manufacturer Part Number:
- A12102
- Manufacturer Part Number:
- 1347963
It is an authentic item which is supplied by the original equipment manufacturer for use with Delta stock feeder shapers. The roller helps to feed the workpiece through the equipment. It is a high-quality replacement for a damaged or a missing component that was installed on a new unit. Refer to the owners manual and the diagrams of your model for the correct installation of this roller. You will ...
Delta Shaper Models
-
Delta SH100 (Type 1) Bench Shaper
-
Delta SH100 Sh100 Shaper
-
Delta 36-856 (Type 1) Stock Feeder Shaper
-
Delta 36-865 (Type 2) Stock Feeder Shaper
-
Delta 43-355 Shaper
-
Delta 43-386 (Type 1) Wood Shaper
-
Delta 43-792 (Type 1) Industrial Shaper
-
Delta 43-384 (Type 2) Wood Shaper
-
Delta 43-460 (Type 1) Industrial Shaper
-
Delta 43-373 (Type 3) Shaper
-
Delta 36-840 (Type 2) Stock Feeder Shaper
-
Delta 43-459 (Type 1) Industrial Shaper
-
Delta 36-855 (Type 2) Stock Feeder Shaper
-
Delta 43-445 (Type 1) Shaper
-
Delta 43-420 Shaper
-
Delta 43-370 (Type 2) Wood Shaper
-
Delta 43-205 (Type 1) Shaper
-
Delta 36-865 (Type 1) Stock Feeder Shaper
-
Delta 36-850 (Type 2) Stock Feeder Shaper
-
Delta 36-840 (Type 1) Stock Feeder Shaper
_WW_1.png)
