OEM Makita Hammer Parts & Accessories

Carbon Brush Set

★★★★★

(7)

$11.38

Manufacturer Part Number:: CB441

Carbon Brush Set

★★★★★

(2)

$16.58

Manufacturer Part Number:: CB175

Genuine Manufacturer Sourced replacement part. This item is made out of Carbon with a Lead Wire attached. This item includes Two (2) Carbon Brushes per order. Please note Brush Holder and Spring are Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear...

Ball Bearing

★★★★★

(2)

$26.07

Manufacturer Part Number:: 211031-6

Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. This reduces wear on the tool, allowing it ...

Compression Spring 3

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 231403-9

This is an authentic OEM part. The Makita compression spring 3 is constructed of metal, and is compatible with the HK1810 Scraper. This part is secured between the steel ball and tool holder, helping the device to hold specific scraping tools. This part is sold individually. A wrench is helpful in the removal and replacement.

Insulation Washer

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 681656-4

it is an authentic high quality Makita replacement part that is specially manufactured for use with sanders and grinders. This is the insulation washer for the armature, please make sure to check appropriate diagrams for correct location and use of this item. One durable plastic washer is included per order.

O-ring

★★★★★

(2)

$7.87

Minimum Quantity of 2 required

Manufacturer Part Number:: 213962-5

This replacement o-ring is specially designed for use with Makita rotary hammers. It is an authentic manufacturer sourced item that is used to provide a seal for the striker and the piston. For correct location please make sure to check appropriate diagrams of your unit. Over time seals and o-rings tend to shrink, become brittle and crack eventually requiring replacement. Please note one durable r...

Brush Holder Unit

$19.39

Manufacturer Part Number:: 632D00-2

This replacement brush holder unit is a high quality item that is supplied by original equipment manufacturer for use with Makita demolition hammers. Its purpose is to secure carbon brushes around the armature to maintain stable contact. This item is a complete assembly which includes the plastic ring, two metal brush holder with attached lead wires, please note the carbon brushes themselves are s...

Ball Bearing 6000ddw

$15.70

Manufacturer Part Number:: 210059-1

This authentic replacement part which is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, over time components may begin to wear out and fail eventually requiring a replacement. Please note this high-quality ball bearing is made of durable metal and it is sold individually.

Carbon Brush Set

★★★★★

(20)

$11.29

Manufacturer Part Number:: CB325

Genuine Makita replacement part. Set of 2 Carbon Brushes with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through...

Carbon Brush Set

★★★★★

(6)

$14.57

Manufacturer Part Number:: CB351

This is a Genuine Manufacturer Sourced replacement part used on Makita Rotary Hammers. Includes Two (2) Carbon Brushes with Lead Wires attached. Please note Brush Holders and Springs are Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they ...

Hex Head Bolt

★★★★★

(8)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 265910-0

This is a genuine manufacturer approved replacement bolt designed for use with Makita reciprocating saw. It is used to secure the blade guide to the slider. This bolt is made out of metal and it is sold individually. Requires a hex key/allen wrench to install or remove this bolt.

Stop Ring

★★★★★

(5)

$6.16

Manufacturer Part Number:: 961018-5

Genuine Makita replacement part this item is sold individually. E-rings are mostly used to keep a part in place and keep it from moving. This part is used in various areas of the different models of tools shown below.

Makita Hammer Parts

Top Makita Hammer Models

Popular Makita Hammer Parts

Makita Hammer Models

Makita Hammer Parts

Search By Model or Part Number

Top Makita Hammer Models

Popular Makita Hammer Parts

Makita Hammer Models