This fuel tank is an authentic replacement part approved by the original equipment manufacturer. It is commonly used in ride mowers and tractors. This tank is designed to contain the fuel needed to power the machine. It is made of plastic, and it should be replaced if it is cracked or broken. The cap is included with the purchase of this part.
1.) Removed the gas old/leaky tank
2.) Drained the remaining gasoline
3.) Secured the new tank into it\'s proper place.
4.) Filled the new gas tank above the middle sealed (\"seam\") section to make sure there were no leaks in that area
I used a 10mm socket to take out the 4 bolts
that held old the old plastic tank in place.
I removed the old tank. It took a few minutes as I didn\'t want to damage and wiring in the area in maneuvering the tank out of the spot.
I used players to take the press clamp off the fuel line from the tank to the carb.
I
... Read more took several minutes to throughly clean the area of the old tank, it was really dirty!
The new tank was a perfect fit.
I reconnected the fuel line to the tank and bolted on the 10mm hold down bolts. Put some gas in, checked for any leaks, and done.
I was just very happy you still had a replacement tank available! Due to the age of our Craftsman riding mower parts availability is becoming questionable.
1. Removed both bolts holding the tank in
2. Lifted tank out
3. Used pliers to remove gas line
4. Attached gas line to new tank
5. Set new gas tank in place
6. Put both bolts back in to secure tank
7. No leaks, no hassles and it works perfectly!
Drained fuel from tank
Removed 2 screws, one on each side of the tank
disconnected fuel line from bottom of tank
connected fuel line to bottom of new tank
installed new tank and bolted to tank mounting brackets
filled tank checked for leaks.
emptied the gas tank and then removed and replaced it with the replacement part. Have to say, great service and prompt delivery and the product was manufacturers replacement part. Purchased a belt previously for the mower deck and had the same great experience. My go to for replacement parts.
1 removed two hex screws
2 removed fuel line from old tank
3 swapped fuel tanks
4 connected fuel line with compression clamp
5 replaced two hex screws
6 filled tank with gasoline & mowed lawn
I have been searching for a new gas tank for over a year with no luck. When I found ereplacementparts.com I ent
... Read moreered Craftsman riding mower and the tank P/N and the correct tank suddenly appeared! I ordered and received the new tank in 3 days. I opened the box, completed the exchange, and was mowing within 20 minutes. I will certainly pass on my story and promote your website to all my friends. Again thank you so much.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9982321
Manufacturer Part Number: 581290101
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Tank or Container","title":"Tank or Container","url":"/parts/lawn-and-garden/lawn-tractor/tanks-and-containers/"},{"position":2,"name":"581290101","title":"581290101","url":""}]
_(2008-01)_WW_5.gif "Part Location Diagram of 581290101 Husqvarna Lawn Mower Fuel Tank")
_(2008-01)_WW_5.gif "Part Location Diagram of 581290101 Husqvarna Lawn Mower Fuel Tank")
