OEM Black and Decker Edger Parts & Accessories

$12.85

Manufacturer Part Number:: 90517802-01

This plastic part is genuine OEM and is used in various DeWALT and Black & Decker edgers. This is a two (2) part handle. Each half attaches together with Torx T20 head screws. It houses a trigger switch, power cord, and protector cord at one end and an upper tube at the other end. The black auxiliary handle (sold separately) is attached to top front of this orange handle. Sold individually.

Rear Wheel

★★★★★

(1)

$6.16

Manufacturer Part Number:: 598955-00

This is a manufacturer-approved component which is specially designed for use with DeWALT and Black and Decker edgers. It is an identical replacement for a missing or a faulty rear wheel that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and installation of this part. This high-quality rear wheel is made of durable plastic...

Wheel Assembly

★★★★★

(15)

$8.13

Manufacturer Part Number:: N569214

This is a genuine item that is sourced from the original equipment manufacturer for use with DeWALT and Black and Decker edgers. It is the special shoulder bolt that is utilized to secure the wheel. This is an identical replacement for a missing or a faulty component that was installed on a new unit. Make sure to refer to the appropriate diagram of your model for the exact location and application...

Power Cord

★★★★★

(1)

$6.17

Manufacturer Part Number:: 243710-00

This is a genuine manufacturer-sourced part which is specially designed for use with DeWALT and Black and Decker landscape edgers. The cord is hardwired to the tool in order to supply power from a standard U.S. outlet, unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct...

BEARING, BALL

★★★★★

(4)

$6.16

Manufacturer Part Number:: 90559833

This authentic replacement part is specially designed for use with Black and Decker lawn edgers. Ball bearings are used to reduce the friction between rotating parts, over time the rollers may wear out and begin to fail eventually requiring a replacement to ensure peak performance. This part is made of high-quality metal and it is sold individually.

Ring,push

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 241658-02

This is available as an individual replacement part and is made of plastic. The push ring fits between the hub cap and the rear wheel. A screwdriver and a set of pliers may be required to replace this item if it becomes broken. This part is an OEM from DeWALT and Black & Decker for use in edgers, lawn mowers, and paint sprayers.

Washer

★★★★★

(2)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 243797-00

This item is an authentic OEM sourced part that is intended to be used with edgers from Black and Decker. The metal washer is used to secure the blade to edger's spindle shaft. This washer is used with edger's that have a spindle shaft that is not round but flat on two sides. This washer is sold as an individual replacement part, please note two washers may be needed.

Knob

★★★★★

(1)

$6.16

Manufacturer Part Number:: 90518859

It is a genuine replacement hardware that is supplied directly from the original equipment manufacturer for use with Dewalt and Black and Decker lawn mowers and edgers. This knob in conjunction with the special bolt is used to secure the upper and lower handles of the mower. It is made of durable black plastic and it is sold individually, please note the bolt and other components are all sold separately.

Nut

★★★★★

(1)

$6.16

Manufacturer Part Number:: 093914-00

It is a high quality hardware that is specially manufactured for use with Dewalt and Black and Decker edgers. This special nut is used to secure the edger blade to the drive shaft. The lock nut is a type of hardware that if threaded on correctly it will resist loosening. It is made from durable metal and it is sold individually.

Edger Blade

★★★★★

(19)

$22.38

Manufacturer Part Number:: 243801-00

This is a genuine replacement Blade for the Black and Decker Edgers shown below. This is a new style Blade for these edgers. If this is the first time you have used this new Blade, you will need to order two of the part number 243797-00 Washers for this new Blade. Or you can order part number EB-007AL 7 1/2" Blade (Includes 2 Washers).

Ring

★★★★★

(3)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 133876-00

This item has been sourced from the original manufacturer to be used with edgers and circular saws from Black and Decker. The metal retaining ring is used to secure the blade guard to the gear case cover assembly. This part is sold as an individual replacement part.

Edge Guide

★★★★★

(9)

$9.12

Minimum Quantity of 2 required

Manufacturer Part Number:: 244276-00

This edge guide is an OEM direct from DeWALT. The metal component is designed for use with lawn edger devices. The edge guide is fastened to the blade guard, allowing the operator to safely make accurate lawn edging. A screwdriver, socket set and a pair of pliers may be required for the installation. The edge guide is sold individually.

Black and Decker Edger Parts

Top Black and Decker Edger Models

Popular Black and Decker Edger Parts

Black and Decker Edger Models

Black and Decker Edger Parts

Search By Model or Part Number

Top Black and Decker Edger Models

Popular Black and Decker Edger Parts

Black and Decker Edger Models