This is a genuine Char-Broil replacement part, it is sold individually. The purpose of the Char-Broil G430-0005-W1 Heat Tent is help prevent flare ups and it also helps distribute the heat of the flame evenly. Over time the Heat Tent will have a tendency to rust and degrade. It should be replaced at this time.
1 I removed the main burner tubes and distribution tubes. I use a screwdriver and socket set.
2 I fitted the new burner tubes in place
3 Screwed the distribution tubes in place
4 Place the tents in their slots
5 Turned on the gas
I used a wire brush to clean up the heads of some of the screwdriver slots on the old rusted parts. Some of the old round-headed bolts with nuts broke when trying to take them out. This was ok because there are more than enough new bolts, nuts, washers, lock washers and screws supplied with the new original replacement parts to do the job
... Read more even if you drop and lose a few. I used never seize on all the new bolts and screw threads when installing for ease of future parts replacement. I replaced all 5 main burners, 4 carryover tubes, 5 heat tents and one searing burner. All original replacement parts installed easily and fit exactly where they were designed to. I used the old electrodes and had to adjust the distance a little to get a good spark to ignite the gas properly. I ran all the burners wide open for 20 minutes and then let it cool down before cooking on the grill.
Read less
Did you find this story helpful?
Thank you for voting!
Main burners were rusty and falling apart. Big yellow flame and unsafe. The ignition module didn\'t work. The heat tents were rusted and burned out.
I pulled the knobs off of the front of the flame adjustment valves. I removed the two screws behind each valve. This allowed me to flex the front enough to replace the ignition module. The screws securing the burners were rusted so I drilled them out and replaced them with new screws. Everything else was easy peasy. My six burner grill wi
... Read moreth side burner works like new. A huge savings over buying a new grill. Ron W.
1. Removed grates from the grill
2, Removed the rusted burnt heat tents
3. Replaced the rusted burnt heat tents
4. Started grilling again with ease and even heat!
5. Will buy more for sure!!
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
