- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Brush Service Kit 22-18-6025
- Manufactured by:
- Milwaukee
- ERP Number:
- ERP10122270
- Part Number:
- 22-18-6025
Does this part fit my model?
Need help finding your model number?Jump to:
Product Description
?This is a genuine brush set designed for use with Milwaukee rotary hammers. This assembly includes two (2) carbon brushes with lead wires attached. Please note brush holders are sold separately. Due to prolonged contact with an armature brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. To complete this repair you would need a screwdriver. • Make sure the unit is unplugged • Remove screws from the housing to gain access to the armature and brushes • Remove old brushes and secure the new ones in brush holders • Re-assemble and test the tool
Frequently Purchased Together
?Troubleshooting
- Milwaukee
- Demolition Hammer
- Hammer Drill
- Electric Drill
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hello Hanoi, Thank you for your inquiry. Check the seals and o-rings that are inside the gearcase for any excessive wear and tear, and we also recommend checking the carbon brushes and armature assembly. Good luck with your repair.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Brushes on electrical motor worn
Irving from Fairfield, California
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- 22-18-6025
Remove lower cover on handle
Removed two spade clips and removed brushes
Replaced with new brushes and reattached spade clips
Replaced lower cover and two screws.
15 minutes
Brushes wore out.
John from Advance, North Carolina
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
- Parts Used:
- 22-20-5316, 22-18-6025
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 22-18-6025
| Brand | Model Number | Description |
|---|---|---|
| Milwaukee | 5316-20 | Hammer Drill - Spline Rotary Hammer 1-9/16" (40MM) |
| Milwaukee | 5317-20 | Demolition Hammer - SDS-Max Rotary Hammer |
| Milwaukee | 5317-21 | Hammer Drill - Milwaukee 5317-21-(C84a) Parts |
| Milwaukee | 5317-59B | Electric Drill - Milwaukee 5317-59b-(G16a) Parts |
| Milwaukee | 5347-59B | Demolition Hammer - Milwaukee 5347-59b-(E85a) Parts |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.