Part Location Diagram of 10NXK Shimano Idle Gear D
See part 541 in the diagram
( Grid squares measure 1x1 inch )

Idle Gear D 10NXK

Manufactured by:
Shimano
ERP Number:
ERP18254426
Part Number:
10NXK
Original Equipment Manufacturer ?
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is a genuine Shimano component which is specially designed for use with fishing reels. The gear is an important part of the unit which helps to drive the shaft. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement to ensure your reel functions properly. One durable plastic idle gear is included. Refer to the appropriate diagram for your model for the correct application. You will need a screwdriver to take the reel apart in order to perform this repair.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Shimano
This part works with the following products:
  • Conventional Reels

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The Line Leveler was not functioning correctly and the reel handle was not smooth and would get stuck

Douglas from Otis, Oregon

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
10NXK, 10NXF
1. Remove the end plate on the end of the Line counter (Opposing end of handle)
2. Locate idle gears that operate the line level.
3. Verify that they teeth on the gears were bad (Flat or missing)
4. Using needle nose pliers remove the gear
5. Lubricate the new gear with lithium grease and then replace.
6. Re place steps with the second gear
Did you find this story helpful?
Thank you for voting!

Nylon level wind gear on fishing reel broke.

Wayne from Belle Harbor, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
10NXK
1. Removed four screws from reel cover on non-handle side of reel.
2. Removed cover to expose nylon gear.
3. Removed screw holding gear in place.
4. Removed broken gear, put new gear in place.
5. Secured new gear with screw.
6. Replaced reel cover, secured four screws to hold cover in place.
7. Gone fishing!!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18254426
Manufacturer Part Number: 10NXK
Brand Model Number Description
Shimano TEK-300LC Conventional Reels - Tekota Drag Reel
Shimano TEK-500LC Conventional Reels - Tekota Drag Reel
Shimano TEK-600LC Conventional Reels - Tekota Drag Reel
Shimano TEK300 Conventional Reels - Star Drag Reel Tekota
Shimano TEK500 Conventional Reels - Star Drag Reel Tekota
Shimano TEK500HGA Conventional Reels - Tekota Conventional Reel
Shimano TEK500HGLCA Conventional Reels - Tekota Conventional Reel
Shimano TEK500HGLCMA Conventional Reels - Tekota Conventional Reel
Shimano TEK501HGA Conventional Reels - Tekota Conventional Reel
Shimano TEK501HGLCA Conventional Reels - Tekota Conventional Reel
Shimano TEK600 Conventional Reels - Star Drag Reel Tekota
Shimano TEK600HGA Conventional Reels - Tekota Conventional Reel
Shimano TEK600HGLCA Conventional Reels - Tekota Conventional Reel
Shimano TEK600HGLCMA Conventional Reels - Tekota Conventional Reel
Shimano TEK601HGA Conventional Reels - Tekota Conventional Reel
Shimano TEK601HGLCA Conventional Reels - Tekota Conventional Reel