This fuel hose/line that is supplied directly from original equipment manufacturer. It is an authentic part commonly used on Husqvarna trimmers/edgers. The fuel line is connected to an in-tank fuel filter (sold separately) that ensures the gas delivered to the carburetor is free of contaminants. This is a clear plastic fuel line that is sold individually.
1. Took pictures before I took it apart.
2. Removed all the plastic.
3. Removed the tank.
4. Replaced the hoses and filter on the tank.
5. Replaced the fuel primer on the main unit.
6. Mounted the new hoses to the new carburetor.
7. Removed the old carburetor.
8. Installed the new carburetor and g
... Read moreasket to the trimmer.
9. Reinstalled the tank and all the plastic.
10. Started the trimmer and made adjustments to the carburetor.
11. Installed the carburetor stops to the Jets.
Read less
Did you find this story helpful?
Thank you for voting!
Fuel line had hardened and split. Could not prime carburetor.
1. Dismantled outer cover and pull rope assembly to allow fuel tank to come loose.
2. Had ordered all fuel lines, fuel filter, primer bubble, and air filter from eReplacementParts, not just the one fuel line that had split.
3. Was a wise choice because another fuel line split during disassembly.
4. Model 322L trimmer fue
... Read morel filter must first be pulled from fuel tank and cut off before fuel line can be removed. Be careful not to disrupt the rubber bushings in the fuel tank the fuel lines pass through. I had not ordered those. The bushings seal the fuel lines to prevent leaks. Mine didn\'t leak, but I had known, it would have been a good idea to have ordered the tank bushings as a good measure and reassurance you get no leaks.
5. When replacing all fuel lines remember to make a sketch where each fuel line connects. This is important. I should have listed this first. Two lines go to the carburetor and to go to the primer bubble. Don\'t trust your memory. Make the sketch.
6. The longer fuel line must be pushed into the tank and brought out the fuel cap opening first before you install the filter. Push the fuel filter and rest of fuel line back into the tank. Some fuel line may have to be trimmed.
7. I replaced the other fuel lines trimming off excess, making sure there were no kinks or pinched segments.
8. I reassembled the fuel tank making sure the tank tabs fit snugly into their respective slots on the trimmer body as well as the pull rope assembly. All the while making sure the fuel lines remained routed properly.
9. Finally I verified none of the fuel lines had come undone and reassembled the outer housing. The carburetor air filter was shipped pre oiled and was easily installed.
10. I installed a new spark plug that I had purchased locally.
Pay attention to the assembly before servicing. Clean your trimmer while it\'s apart with rags and WD40 or some other oil solvent cleaner.
I started the trimmer and it ran great. No leaks from fuel system. Ready to go.
1. Removed all the plastic housings
2. Removed the gas tank
3. Removed old hose pieces and replaced with new ones
4. Popped the fuel primer back in
5. Replaced gas tank and plastic housings
6. Even found a few pieces that had broken years ago like bottom metal plate
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/brush-cutter/hoses-and-tubes/"},{"position":2,"name":"537052301","title":"537052301","url":""}]
_WW_11.gif "Part Location Diagram of 537052301 Husqvarna Trimmer Hose")
_WW_11.gif "Part Location Diagram of 537052301 Husqvarna Trimmer Hose")
