Inglis Washer Parts
We sell only genuine OEM Inglis ® parts.
Top Inglis Washer Models
See All ModelsPopular Inglis Washer Parts
- Manufacturer Part Number:
- W10135699
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
- Manufacturer Part Number:
- W10780048
This washing machine suspension rod kit includes 4 suspension rods, 4 suspension balls, and 4 bushings to stabilize the washer tub and minimize vibrations during operation. If the washer shakes or vibrates excessively, replacing the suspension rods may resolve the issue. Installation requires safety precautions, such as unplugging the appliance and wearing work gloves.
- Manufacturer Part Number:
- W10528947
- Manufacturer Part Number:
- W10780045
- Manufacturer Part Number:
- W10913953
- Manufacturer Part Number:
- 285811
The agitator kit is most commonly used if the top part of the agitator is not moving correctly but the bottom is. This kit now includes all pieces shown in photo plus the thrust spacer, inner cap seal, and washer. You may need agitator grease for repair.
- Manufacturer Part Number:
- WP3363394
This pump is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one.
- Manufacturer Part Number:
- W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. ...
- Manufacturer Part Number:
- WPW10006384
- Manufacturer Part Number:
- 285785
A worn clutch can cause a slower spin speed which will leave your clothes wet after a cycle. This clutch assembly comes with brake cam driver, blue spring for large capacity washers and black spring for compact washers. As per factory, the blue spring (1.24") replaces the black spring (1.46").
- Manufacturer Part Number:
- WP63907
This suspension spring is used to support and balance the outer tub of your washer. The spring is sold Individually.
- Manufacturer Part Number:
- 80040
These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
Inglis Washer Models
Shop by Popular Inglis Washer Part Types
- Inglis Washer Agitators
- Inglis Washer Brackets and Flanges
- Inglis Washer Caps and Lids
- Inglis Washer Circuit Boards and Touch Pads
- Inglis Washer Dispensers
- Inglis Washer Hardware
- Inglis Washer Hinges
- Inglis Washer Hoses and Tubes
- Inglis Washer Knobs
- Inglis Washer Seals and Gaskets
- Inglis Washer Springs and Shock Absorbers
- Inglis Washer Switches
- Inglis Washer Transmissions and Clutches
- Inglis Washer Valves
- Inglis Washer Wire Plugs and Connectors