Kenmore Dishwasher Parts
We sell only genuine OEM Kenmore ® parts.
Top Kenmore Dishwasher Models
See All ModelsPopular Kenmore Dishwasher Parts
- Manufacturer Part Number:
- WPW10195417
Sold individually. This roller is for use on the lower dish rack. The dishrack roller attaches to the dishrack and allows you to roll the dishrack in and out.
- Manufacturer Part Number:
- WPW10195622
This rack stop clip works for either the right or left side of your upper dish rack. This part is sold individually.
- Manufacturer Part Number:
- W10518394
This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher and also comes with the 2 washers.
- Manufacturer Part Number:
- WPW10546503
This adjuster connects to the side of the top dishrack. It is used to change the height of the upper rack.
- Manufacturer Part Number:
- W10712395
This is an OEM replacement part for dishwashers, designed to allow for the adjustment of the upper rack's height to accommodate dishes of various sizes.
- Manufacturer Part Number:
- 5304517203
The lower spray arm sprays water while it rotates inside the dishwasher during cycles. Note: Lower spray support should be ordered if your replacing the lower spray arm.
- Manufacturer Part Number:
- 154827601
The tub gasket provides a waterproof seal between the tub and the door of your dishwasher.
- Manufacturer Part Number:
- W10712394
This part has been redesigned and now comes in a kit. This kit includes 2 adjuster assemblies, 1 left-hand and 1 right-hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings.
- Manufacturer Part Number:
- 809006501
This gasket goes on the bottom of the dishwasher door to create a tight seal between the tub and the outer edge of the door. If the gasket is cracked or broken, it will need to be replaced to keep water from leaking out on to the floor. The gasket is approximately 23” long and is a genuine OEM part. It is recommended that once you have installed the gasket to leave the door closed for a few hours ...
- Manufacturer Part Number:
- W11177741
Prevent leaks and maintain optimal cleaning performance with this durable dishwasher door seal. It creates a secure barrier to keep water contained during wash cycles, ensuring reliable operation. Replace by removing the old seal and fitting the new one snugly around the door frame.
- Manufacturer Part Number:
- WP8565925
This rack track stop is used for your upper dish rack track. It is sold individually.
- Manufacturer Part Number:
- W10195416
Sold individually. Each roller holds two wheels. There are four sets that attached to the lower rack.
Kenmore Dishwasher Models
Shop by Popular Kenmore Dishwasher Part Types
- Kenmore Dishwasher Brackets and Flanges
- Kenmore Dishwasher Caps and Lids
- Kenmore Dishwasher Circuit Boards and Touch Pads
- Kenmore Dishwasher Dishracks
- Kenmore Dishwasher Dispensers
- Kenmore Dishwasher Doors
- Kenmore Dishwasher Ducts and Vents
- Kenmore Dishwasher Elements and Burners
- Kenmore Dishwasher Filters
- Kenmore Dishwasher Grilles and Kickplates
- Kenmore Dishwasher Handles
- Kenmore Dishwasher Hardware
- Kenmore Dishwasher Hinges
- Kenmore Dishwasher Hoses and Tubes
- Kenmore Dishwasher Insulation
- Kenmore Dishwasher Knobs
- Kenmore Dishwasher Latches
- Kenmore Dishwasher Legs and Feet
- Kenmore Dishwasher Motors
- Kenmore Dishwasher Panels
- Kenmore Dishwasher Pumps
- Kenmore Dishwasher Racks
- Kenmore Dishwasher Seals and Gaskets
- Kenmore Dishwasher Sensors
- Kenmore Dishwasher Spray Arms
- Kenmore Dishwasher Springs and Shock Absorbers
- Kenmore Dishwasher Switches
- Kenmore Dishwasher Thermostats
- Kenmore Dishwasher Timers
- Kenmore Dishwasher Valves
- Kenmore Dishwasher Wheels and Rollers
- Kenmore Dishwasher Wire Plugs and Connectors