Makita Laminate Trimmer Parts
We sell only genuine OEM Makita ® parts.
Top Makita Laminate Trimmer Models
-
Makita 3700B Trimmer Laminate Trimmer Parts
-
Makita 3709 Tilt Base 1/4" Laminate Trimmer With L.E.D. Light Parts
-
Makita 3707FC Fixed Base Laminate Trimmer Parts
-
Makita 3706 Drywall Cut-Out Tool Laminate Trimmer Parts
-
Makita 3708FC Tilt Base Laminate Trimmer Parts
-
Makita 3700D Trimmer Laminate Trimmer Parts
-
Makita 3703 1/4" Laminate Trimmer Parts
-
Makita 3702B Laminate Trimmer Parts
Popular Makita Laminate Trimmer Parts
- Manufacturer Part Number:
- CB76
- Manufacturer Part Number:
- CB408
This #191938-1 (CB-408) Makita carbon brush set contains two individual carbon brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an...
- Manufacturer Part Number:
- 643550-8
This brush cap is a genuine OEM sourced replacement part. It is commonly used on a variety of Makita power tools. This brush cap helps to secure the carbon brush in the brush holder. This cap has external threads that will thread into the opening in the housing. This item is made out of durable plastic and it is sold individually. It has a convenient slot that makes it easy to secure or remove it ...
- Manufacturer Part Number:
- 941101-4
This item is a genuine Makita part that has been sourced from the original manufacturer to be used with trimmers, circular saws, sanders, routers, nailers, reciprocating saws, laminate trimmers, and planers. The flat washer is used with different types of power tools and the application of the washer can vary based on the model of the equipment. This item is available as an individual replacement part.
- Manufacturer Part Number:
- 252652-5
This genuine manufacturer-sourced screw is made for Makita laminate trimmers. The thumb nut is a standard hardware which helps to lock the base. Check the diagrams for your specific model to ensure the exact location and use of this part. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. One durable thumb nut is included.
- Manufacturer Part Number:
- 226217-9
This is an authentic replacement part manufactured for use with Makita laminate trimmers and plate joiners. The special spur gear has an arbor hole with two flat sides to fit the shape of a thumb screw and is used to raise and lower the motor housing. This spur gear is sold as an individual replacement part, please see model diagram for associative parts.
- Manufacturer Part Number:
- 262553-9
- Manufacturer Part Number:
- 763606-2
This replacement collect nut is specially produced by the original manufacturer for use with Makita trimmers and routers. It allows a user to secure the collet to the tools shank. This part is made of high-quality metal and it is sold individually.
- Manufacturer Part Number:
- 211236-8
This Ball Bearing is sealed on both sides. This is a genuine Makita replacement part that is sold individually. • Ball bearings minimize friction between 2 parts in your tool that would otherwise spin and rub against each other. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the balls reduce friction. This reduces wear on the too...
- Manufacturer Part Number:
- 651423-1
This item has been sourced from the original manufacturer and is intended to be used with routers, drywall cut out tools, laminate trimmers, demolition tools, and multi-tools from Makita. The switch is used to relay electricity from the power cord to the tool's motor. This item is sold as an individual replacement part.
- Manufacturer Part Number:
- 681614-0
This genuine manufacturer-sourced part is specially designed for Makita power tools. It is an important component which provides a tight seal between connected components. Unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement. To ensure the correct repair procedure, refer to the appropriate diagrams for your model. Note, this high-quality insulation...
- Manufacturer Part Number:
- 419138-4
This part is available as an individual replacement. The base attaches to the motor housing. A screwdriver and a wrench might be helpful during the installation of this part. It is made out of plastic and will need to be replaced if it becomes broken. This is a genuine OEM sourced part which is specially designed for use with Makita trimmers.
Makita Laminate Trimmer Models
-
Makita 3700B Trimmer Laminate Trimmer
-
Makita 3709 Tilt Base 1/4" Laminate Trimmer With L.E.D. Light
-
Makita 3707FC Fixed Base Laminate Trimmer
-
Makita 3706 Drywall Cut-Out Tool Laminate Trimmer
-
Makita 3708FC Tilt Base Laminate Trimmer
-
Makita 3700D Trimmer Laminate Trimmer
-
Makita 3703 1/4" Laminate Trimmer
-
Makita 3702B Laminate Trimmer
-
Makita 3705 Trimmer Laminate Trimmer
