DeWALT Laminate Trimmer Parts
We sell only genuine OEM DeWALT ® parts.
Top DeWALT Laminate Trimmer Models
-
DeWALT DWE6000 (Type 1) Laminate Trimmer Parts
-
DeWALT D26670 (Type 1) Laminate Trimmer Parts
-
DeWALT DW673 (Type 1) Laminate Trimmer Parts
-
DeWALT DW670 (Type 1) Laminate Trimmer Parts
-
DeWALT DW679 (Type 1) Laminate Trimmer Motor Parts
-
DeWALT DW672 (Type 1) Offset Laminate Trimmer Parts
-
DeWALT DW671 (Type 1) Tilt Base Laminate Trimmer Parts
-
DeWALT DW674 (Type 1) Laminate Trimmer Parts
Popular DeWALT Laminate Trimmer Parts
- Manufacturer Part Number:
- N381708
This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used laminate trimmers. The brushes fit into the motor housing. The brushes are used to relay electricity from the switch to the motor's armature assembly. The brushes are sold as a pair.
- Manufacturer Part Number:
- N381728
This part is available as an individual replacement. The sub-base is made of plastic and attaches to the base. When replacing this part a screwdriver may be needed. It will require replacing if it becomes cracked or broken. This item is an original part from DeWALT for use in laminate trimmers.
- Manufacturer Part Number:
- N381528
This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used with laminate trimmers. The base is a complete replacement part that is pre-assembled. This item is used to link the sub-base and the motor housing. This item is priced as a single item.
- Manufacturer Part Number:
- 874538SV
This is a genuine OEM replacement part, it is sold individually. This Ball Bearing is sealed on both sides. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. • This reduces wear on the tool and allows it to run smoothly. • Bearings experienc...
- Manufacturer Part Number:
- N381502
This is an authentic DeWALT replacement part, sourced directly from the manufacturer. The collet is found in a laminate trimmer, and is used to clamp the bit in place. This is a metal part, and is sold individually. To replace this part, you will need a wrench to loosen the collet nut, and then the collet should be simply to remove. You may also need a screwdriver to reach the part for replacement.
- Manufacturer Part Number:
- 930802-00
Genuine DeWalt replacement part Includes 1 Carbon Brush with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that throu...
- Manufacturer Part Number:
- 876676
This is available as an individual replacement part. The spring fits between the knob and the washer and is made out of metal. No tools should be required to replace this part if it becomes bent or broken. This spring is an original part from Porter Cable and DeWALT for use in trimmers.
- Manufacturer Part Number:
- N381709
- Manufacturer Part Number:
- N031636
Genuine OEM replacement part Includes 1 Carbon Brush in metal housing for easy installation. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning...
- Manufacturer Part Number:
- 605040-65
This Ball Bearing is sealed on both sides. It is a genuine DeWalt replacement part and is sold individually. • Ball bearings are used to reduce friction between rotating parts.. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experien...
- Manufacturer Part Number:
- 859359
This is a genuine replacement part manufactured for use is power tools. This versatile steel washer has many applications. Usually this type of washer is used when fastening two components of a tool together with a nut and bolt. This washer is sold individually, please see model diagram for part location and usage.
- Manufacturer Part Number:
- N381704
DeWALT Laminate Trimmer Models
-
DeWALT DWE6000 (Type 1) Laminate Trimmer
-
DeWALT D26670 (Type 1) Laminate Trimmer
-
DeWALT DW673 (Type 1) Laminate Trimmer
-
DeWALT DW670 (Type 1) Laminate Trimmer
-
DeWALT DW679 (Type 1) Laminate Trimmer Motor
-
DeWALT DW672 (Type 1) Offset Laminate Trimmer
-
DeWALT DW671 (Type 1) Tilt Base Laminate Trimmer
-
DeWALT DW674 (Type 1) Laminate Trimmer