Easy
15-30 minutes
This is a genuine Makita replacement part that has been sourced from the original manufacturer to be used with angle grinders and die grinders. The o-ring is commonly used to seat and support the drive gear bearing assembly. This item is sold as an individual replacement part.
O-ring 26 213445-5
OEM part for: Makita
Part Number: 213445-5
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This O-ring 26 will fit the following 99 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Makita
Show More Compatible ModelsThis item works with the following types of products:
- Grinder Parts
- Rotary Hammer Parts
Repair Videos ?
Watch the Repair Video for
O-ring 26
Articles:
|
Gearbox leaking grease? Replacing the bearing O-ring on your Makita grinder may help. Step-by-step instructions show you...
November 24, 2015
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for O-ring 26
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Grinder was intermittently bogging down.
GREG - September 9, 2018
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, Impact driver to remove helical gear
Remove 4 gearbox mounting screws, gearbox will simply fall off. Use impact to remove pinion gear. Use small gear puller or hammer to remove motor end plate from motor shaft. Pop bearing out of plate. Install new bearing, reverse of removal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I had a stripped drive gear on a Makita Grinder.
Edward - July 17, 2017
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
I used the Exploded view provided for locating the parts needed for my repair. The assembly went smoothly. The grinder works great. All parts fit with out modification.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Front bearing was bad, making lots of noise and RPM's were half the normal speed
Gary - November 20, 2015
Tool Type
Grinder
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Bearing Puller, Droemel Cut-off wheel, Hammer
Pulled front bearing off with small bearing puller. Decided to replace rear pulley also. Had to cut rear pulley with Dremel cut-off wheel. Used sockets to tap bearings back on shafts and replaced rubber O ring around the front bearing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
