Easy
15-30 minutes
Manual Operators P234g 988000652
OEM part for: Ryobi
Part Number: 988000652
$3.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This Manual Operators P234g will fit the following 1 machine. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Impact Driver Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Manual Operators P234g
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The housing for my impact driver was beat up from abuse from dropping it and just just every day use.
Craig - February 1, 2016
Tool Type
Impact Driver
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Star driver
I unscrewed the eight screws holding the case together and the four screws holding the front metal gear case and assembly . Then I needed to split the case apart an the remove the gear case and the motor and switch will all come out together as one piece and just set it in the new housing and need to remove the forward reverse push bar and slide it in the new housing, you may have to pull up on the switch to have it sit right in the bar. Then slid the battery terminal, the metal clip for the belt holder and magnet from the old housing and put them in the new housing, or replace them with the new parts if you bought them. Now put the housing together and put all the screws back in, the four screws for the gear case cover are the smaller screws. The screws are a star with the little tit in the center so the bits you use must have a hole in the center of the star. If you find two little pieces of rubber with the new housing they go inside the housing on a plastic strip so it will hold the motor steady just look at the old case and you will see them one on each side of the housing. Hope this helps.
Craig
Craig
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
