Easy
15-30 minutes
Module,electron 326297-01
OEM part for: DeWALT
Part Number: 326297-01
$118.14
In Stock
Ships within 1 business day 
Compatibility
This Module,electron will fit the following 7 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
DeWALT
Show More Compatible ModelsThis item works with the following types of products:
- Router Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
BEWARE! My Dewalt plunge router DW-621 would only run for a secnd
When I checked it out I read that others had this issue and it was the rheostat that was not functioning properly. This is no simple rheostat it will maintain the set speed under a load, a feature essential in the work I do. The replacement cost is $130.oo so I checked to see what a new router would cost and it was about double that. For a few seconds I pondered getting a new router, that way it was ALL new. I opted for a new electronic rheostat. installation was a snap although the plastic guide the lead wires were threaded through placed both wires directly on the metal devices for the bare rotor electrical contacts, big fat alarm! I removed a small thin portion of the plastic guide, running the wires up and over the guide and well away from the electrical contacts. This was the same way the original rheostat was wired, now I knew why. BEWARE: Make sure you re-route the wires to the safe route on this router rheostat! (I just couldn't resist, pun intended:) LOL The install was easy taking 5 minutes max, runs like a champ now.
Guest -
June 17, 2023
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Module,electron
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Router would start and stop but would not run long enough to use
Jim - March 8, 2022
Tool Type
Router
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed old module.
Installed new module
Installed new module
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not turn on
Victor - October 24, 2021
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Screwdriver and torxdriver
Parts Used
I removed the plastic housing on top, side, and switch handle, disconnected 2 wires for the speed control module, and removed the control module. Six screws and 2 wire terminal screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My Dewalt router DW621 would start, run for a few seconds and then shut down.
Glenn - April 27, 2017
Tool Type
Router
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Torx screwdriver, small slotted screwdriver.
Parts Used
1: Removed the top cover plate. (2 screws).
2: Removed the side cover plate. (2 screws).
3: Loosed two screws holding the connection wires. (Small slotted screwdriver.)
4: Lifted out the defective module.
5: Threaded in the new module.
6: Connected the wires.
7: Dropped in the new module.
8: Replaced the cover plates.
9: Tested the router.
Notes: There is one purple wire and one gray wire. Note where they are before disconnecting. Note which side the speed adjuster is on the module before removing.
2: Removed the side cover plate. (2 screws).
3: Loosed two screws holding the connection wires. (Small slotted screwdriver.)
4: Lifted out the defective module.
5: Threaded in the new module.
6: Connected the wires.
7: Dropped in the new module.
8: Replaced the cover plates.
9: Tested the router.
Notes: There is one purple wire and one gray wire. Note where they are before disconnecting. Note which side the speed adjuster is on the module before removing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Router variable speed control stopped working.
Crist - January 11, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Router
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
I was able to disassemble the switch mechanism, removed 2 wires, and 2 more screws from the top and the variable speed control lifted away. The new control was replaced reversing the above procedure.
Router now works like a new one.
Router now works like a new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
