OEM Milwaukee Circular Saw Parts & Accessories

Brush Tube Assembly

$6.16

Manufacturer Part Number:: 22-22-1030

This is a manufacturer sourced replacement part used on a Milwaukee power tools. This part holds carbon brushes around the armature to provide stable and safe contact. Please note brushes are sold separately. This part is made out of plastic and metal. It is sold individually. To replace this assembly you would need a screwdriver and pliers. • First remove screws holding the cover together • ...

Washer

★★★★★

(3)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 45-88-1560

This is a washer designed for use within various models of circular saws. This is a flat washer that is used within the gear case assembly to secure the shoe assembly, the part that guides the saw and prevents digging, to the saw. This washer serves multiple different purposes on the saw, so it can be used in a variety of different applications.

Switch

★★★★★

(5)

$34.47

Manufacturer Part Number:: 23-66-2635

This is an on/off switch for various models of circular saws. This switch is located near the main handle assembly of the saw and responsible for toggling the power to the saw. This switch is made of durable black plastic and features a single toggle that the user presses to turn the saw on. Over time and through extended use, this switch can wear out and fail, at which point it needs to be tested...

Depth Adjustment Lever

$6.16

Manufacturer Part Number:: 44-10-1085

Carbon Brush

★★★★★

(6)

$25.76

Manufacturer Part Number:: 22-18-0730

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead and brush spring attached. 2 of these brushes are need for the tools listed below. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power t...

Bevel Adjustment Knob

★★★★★

(3)

$6.16

Manufacturer Part Number:: 43-98-0705

This is an authentic OEM part. The Milwaukee bevel adjustment knob is compatible with Cordless M18 Fuel Circular Saws. This plastic and metal item is fitted onto the rip fence spring, allowing the operator to secure the preferred shoe angle. The bevel adjustment knob is sold individually. An adjustable wrench may be needed for the repair. Please refer to the specific manual for additional instructions.

Brush Assembly

$7.13

Manufacturer Part Number:: 22-18-0035

This is genuine replacement carbon brush sourced from original manufacturer. It is designed for use with Milwaukee circular saw. This assembly includes one (1) carbon brush with a lead wire and a spring attached. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both br...

M6 X 28mm Carriage Bolt

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 06-10-0110

This is a genuine OEM part. The carriage bolt (m6 X 28mm) is made for use with Cordless M18 Fuel Circular Saws. The bolt secures the bevel adjustment knob on the foot, allowing the operator to cut at the preferred angle. A wrench is necessary for the repair. The metal carriage bolt is sold individually.

Inner Blade Flange

★★★★★

(5)

$6.75

Manufacturer Part Number:: 43-34-0790

This is an original manufacturer approved replacement part specially designed for use with Milwaukee circular saws. The purpose of this flange is to helps securing the grinding wheel to the spindle/shaft. It is a metal part and it is sold individually. You would need a wrench to remove blade bolt when replacing this flange.

Outer Flange Blade

★★★★★

(7)

$7.89

Minimum Quantity of 2 required

Manufacturer Part Number:: 43-34-0795

This is an original Milwaukee replacement item designed for use with circular saws. It is supplied by original equipment manufacturer. This item helps to secure saw blade to the spindle/shaft. This is a metal outer flange and it is sold individually. Please note you would need a wrench to remove the blade bolt when replacing a flange.

Brush Assembly

★★★★★

(8)

$6.37

Manufacturer Part Number:: 22-18-0075

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. Two brushes are needed for the tools shown below. • Worn brushes are often the cause behind a a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most c...

Drive Nut, 2830-20

$6.16

Manufacturer Part Number:: 05-59-2045

Milwaukee Circular Saw Parts

Top Milwaukee Circular Saw Models

Popular Milwaukee Circular Saw Parts

Milwaukee Circular Saw Models

Shop by Popular Milwaukee Circular Saw Part Types

Milwaukee Circular Saw Parts

Search By Model or Part Number

Top Milwaukee Circular Saw Models

Popular Milwaukee Circular Saw Parts

Milwaukee Circular Saw Models

Shop by Popular Milwaukee Circular Saw Part Types