Medium
30-60 minutes
It is a genuine manufacturer-sourced part which is designed for Weber grills. The manifold distributes the gas to each of the grill's three burners. The valves are built into the manifold, which allows you to adjust the gas from off to full. Common manifold assembly problems include stuck valves, a valve that won't shut off completely, and a plugged valve or an orifice. It is an identical replacement for a damaged or a missing part that was installed on a new unit. Make sure to unplug the gas tank before performing this repair. Refer to the appropriate diagram for your model when replacing this component. Note, this high-quality manifold assembly is sold as an individual item.
Manifold Assembly 67708
OEM part for: Weber
Part Number: 67708
$216.29
In Stock
Ships within 1 business day 
Compatibility
This Manifold Assembly will fit the following 13 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 13 of 13 matching models.
13 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Weber
This item works with the following types of products:
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy Peasy
The repair was simple. The part was identical to original part. I basically rebuilt my grill and now is as good as new. No problems. Will order more parts if required.
Guest -
June 9, 2022
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Manifold Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Gas burner control broken. Due to water infiltration.
Stephen - August 17, 2021
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Adjustable Wrench
Parts Used
Removed burner valve manifold per instructions.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gas valves didnt work and tubes were rusted out.
William - March 4, 2019
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Easy self explanatory
Did you find this story helpful?
Thanks for voting and helping fellow customers!
One valve on the manifold was frozen and the burners were used up after 10 years
Henry - December 5, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Disassembled the grill and removed the manifold and the burners. Replaced with the new parts I received. Took less than 30 minutes and my grill is back.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Grill was burning way too hot
Richard - August 16, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Remove control knobs. Remove top cover plate screw then plate. Remove two manifold bolts. Remove hose clip. Release the igniter. Remove old manifold. Install new hose clip. Reattach igniter. Install manifold and two bolts. Install cover plate then the cover plate screw. Replace burner knobs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gas valves wore out
Edward - July 30, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Nutdriver, Adjustable Wrench
Parts Used
Just had to unbolt old piece in put new part in.
I followed the instructions included with the part
I followed the instructions included with the part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
One of my burner valves was frozen and needed to replace the manifold
Mark - July 19, 2016
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Socket set, Wrench Set
Parts Used
ereplacement parts sent me my new manifold for a Weber E310 series Genesis grill. I was happy that Weber instructions on installation were included. The hardest part was removing the old manifold bracket nuts. They were rusted shut. I broke both them off, and pounded the bolts off with a hammer. After that, the install of the manifold was a breeze. My Weber 310 is like new again!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
broken gas valve
howard - June 13, 2016
Tool Type
Outdoor Grill
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
One gas valve was discovered broken. Was unable to order the valve alone, so I ordered the entire manifold. Part arrived very promptly (thanks!). The manifold did not fit. In the interest of expedience, I decided to remove a valve from the new manifold and use it to replace the non-functional one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old Age & Disrepair
Dan - April 2, 2016
Tool Type
Outdoor Grill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Wrench Set
I made them up as I went along.
As anticipated. a couple of screws were rusted and softened beyond usability. Thankfully I was able to find one that would work.
The grill looks and runs great.
I only wish that i knew there was hardware in the manifold kit so that I wouldn't have to buy and order it separately as I did.
Seven bucks down the drain.
All parts and website are the real deal.
I will most certainly look to this place for any and all Weber grill parts and needs.
As anticipated. a couple of screws were rusted and softened beyond usability. Thankfully I was able to find one that would work.
The grill looks and runs great.
I only wish that i knew there was hardware in the manifold kit so that I wouldn't have to buy and order it separately as I did.
Seven bucks down the drain.
All parts and website are the real deal.
I will most certainly look to this place for any and all Weber grill parts and needs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
