Easy
30-60 minutes
This replacement part is supplied by the original manufacturer and is designed for use with Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. The purpose of this fuel line is to supply fuel from the tank to carburetor. One high-quality rubber line-fuel and two metal clamps are included. Over time fuel lines will deteriorate and become brittle eventually requiring replacements. Check the appropriate diagrams for your model for the exact location and the correct application. Pliers may be needed to secure and remove the clamps that hold the line.
Line-fuel 791873
OEM part for: Briggs and Stratton, Toro
Part Number: 791873
$15.98
In Stock
Order within the next 2 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Line-fuel will fit the following 8490 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Engine Parts
- Lawn Mower Parts
This part replaces obsolete part #: 492791, 691371
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
mower overhaul
came quick, solved my problem
Roger -
April 30, 2023
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Line-fuel
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Float valve stuck uv ate bracket
Elbert - October 11, 2019
Tool Type
Lawn Mower
Difficulty
Easy
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Parts cleaner
Replace cable bracket clean paint rusty parts push handle. Remove Flote bowl remove float valve clean all parts in parts cleaner mask paint bowl adjust to factory spec reassemble add fluids. Start run mow on hour make needed adjustment replace decals open vent gas cap. Run mow 30 min
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel line cracked and leaking
Kenneth - June 27, 2018
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Drained fuel tank.
2. Unbolted fuel tank.
3. Removed clamps and old fuel line.
4. Installed new fuel line and clamps.
5. Moved fuel tank back into position.
6. Bolted tank in place.
7. Filled tank with gas and inspected for leaks.
2. Unbolted fuel tank.
3. Removed clamps and old fuel line.
4. Installed new fuel line and clamps.
5. Moved fuel tank back into position.
6. Bolted tank in place.
7. Filled tank with gas and inspected for leaks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bought a High wheel lawn mower in 2002. Fuel tank started leaking in 2014 when filled to 1/2. Fuel line was also cracked.
JOHN - May 7, 2016
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
1. Disconnect spark plug wire.
2. Drain fuel from tank.
3. Remove 2 screws that secure finger guard .
4. Remove 3 bolts located on top that secure tank to engine and 1 bolt under the the tank.
5. With pliers, move hose clamps to center of fuel line. Remove fuel line.
6. Install new fuel line to Carb first and move clamp into position.
7. Install new fuel to new tank and move clamp into position. Place new tank on top of engine and install 3 bolts, do not tighten them down. Replace bolt and spacer under tank to engine,do not tighten.
8. Check position and fit, tighten down.
9. Replace finger guard making sure the clip is in place located on the back side of engine. Replace 2 screws and tighten.
10. Add a little fuel and check for leaks.
11. Connect plug wire, prime and start.
2. Drain fuel from tank.
3. Remove 2 screws that secure finger guard .
4. Remove 3 bolts located on top that secure tank to engine and 1 bolt under the the tank.
5. With pliers, move hose clamps to center of fuel line. Remove fuel line.
6. Install new fuel line to Carb first and move clamp into position.
7. Install new fuel to new tank and move clamp into position. Place new tank on top of engine and install 3 bolts, do not tighten them down. Replace bolt and spacer under tank to engine,do not tighten.
8. Check position and fit, tighten down.
9. Replace finger guard making sure the clip is in place located on the back side of engine. Replace 2 screws and tighten.
10. Add a little fuel and check for leaks.
11. Connect plug wire, prime and start.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
