Easy
30-60 minutes
Lever-brake C320000141
OEM part for: Echo
Part Number: C320000141
$16.51
In Stock
Order within the next 2 hours and your part ships today! 
Compatibility
This Lever-brake will fit the following 11 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 10 of 11 matching models.
Echo
11 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Echo
This item works with the following types of products:
- Chain Saw
- Saw
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Lever-brake
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Cut a tree too fast, it snapped and sling me backwards when the tree hit my chainsaw hand brake. So I needed to repair that and then I said let’s go all out and get a new air filter.
TODD - January 12, 2021
Tool Type
Chain Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
Echo 450P
Air Filter
1. Remove air filter cover
2. Remove air filter fastener, remove old air filter, install new filter, put the remaining stuff you took off, back on exactly like the manufacture assembled it.
Chain brake:
1. Loosen chain guard cover, now loosen chain
2. Remove chainsaw cover, then remove chain and then the bar
3. Remove brake handle screw that was blocked by the chain guard/clutch cover
4. Now remove the screw on the opposite side of the hand brake (your not hallucinating, they are different sizes, don’t mix them up)
5. Remove chain brake handle. Don’t throw it away just yet, you are gonna need the metal sleeve as the new one doesn’t come with that or your handle is gonna get all wabbly on you and irritate the fire out of you.
6. Now put the bushing in the new handle. Lay all that stuff aside on the table
7. Get out the air compressor and air chuck and wear your safety glasses and blow all of that build up of saw dust out of the clutch area, out of the bar in the chain guides and the roller area. If your really feeling up to it, take the air filter cover off, and the starter cover off (you’ll have to remove the metal handle for that) and clean the entire saw freeing it of that pesky build up of oil and saw dust.
8. Now put all of that stuff you took off without losing the screws and forgetting the location they go in and install the starter, air filter cover, metal handle and the hand brake.
9. Bows a good time to make sure your Oiler is working properly. Crank that bad girl up with the chain, bar, and clutch cover off and make sure oil is coming out of the Oiler. If not check your oil level if that’s not the problem adjust your Oiler by the screw on the bottom, if that doesn’t work, call these guys up and purchase a new oil.
10. Everything good to go now? Sweeet! Put her back together.
11. We’re not done yet! Stop rushing me!!! Did you remember to sharpen the chain? I think now would be a good time don’t you?
12. Stop arguing with me and sharpen the chain, you’ll embarrass yourself when your Neigbor watches you cut a 4” pine beach for five minutes, don’t believe me try it, been there done that!
13. Now go have an ice cold beer, appreciate a job well done and cut those trees and limbs tomorrow when the wife’s home, then you won’t have to help her clean house ;D
Air Filter
1. Remove air filter cover
2. Remove air filter fastener, remove old air filter, install new filter, put the remaining stuff you took off, back on exactly like the manufacture assembled it.
Chain brake:
1. Loosen chain guard cover, now loosen chain
2. Remove chainsaw cover, then remove chain and then the bar
3. Remove brake handle screw that was blocked by the chain guard/clutch cover
4. Now remove the screw on the opposite side of the hand brake (your not hallucinating, they are different sizes, don’t mix them up)
5. Remove chain brake handle. Don’t throw it away just yet, you are gonna need the metal sleeve as the new one doesn’t come with that or your handle is gonna get all wabbly on you and irritate the fire out of you.
6. Now put the bushing in the new handle. Lay all that stuff aside on the table
7. Get out the air compressor and air chuck and wear your safety glasses and blow all of that build up of saw dust out of the clutch area, out of the bar in the chain guides and the roller area. If your really feeling up to it, take the air filter cover off, and the starter cover off (you’ll have to remove the metal handle for that) and clean the entire saw freeing it of that pesky build up of oil and saw dust.
8. Now put all of that stuff you took off without losing the screws and forgetting the location they go in and install the starter, air filter cover, metal handle and the hand brake.
9. Bows a good time to make sure your Oiler is working properly. Crank that bad girl up with the chain, bar, and clutch cover off and make sure oil is coming out of the Oiler. If not check your oil level if that’s not the problem adjust your Oiler by the screw on the bottom, if that doesn’t work, call these guys up and purchase a new oil.
10. Everything good to go now? Sweeet! Put her back together.
11. We’re not done yet! Stop rushing me!!! Did you remember to sharpen the chain? I think now would be a good time don’t you?
12. Stop arguing with me and sharpen the chain, you’ll embarrass yourself when your Neigbor watches you cut a 4” pine beach for five minutes, don’t believe me try it, been there done that!
13. Now go have an ice cold beer, appreciate a job well done and cut those trees and limbs tomorrow when the wife’s home, then you won’t have to help her clean house ;D
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
