Easy
15-30 minutes
This label is a genuine replacement part supplied by the original equipment manufacturer. It is compatible with many different machines such as trimmers, cultivators, pruners, pumps, and vacuums. This label should be replaced if it is worn or begins to peel off. Replacing this label will keep your equipment looking pristine. No tools are needed to replace it. Simply remove the backing from the label and apply it with your hands.
Label-choke 89012106360
OEM part for: Echo
Part Number: 89012106360
$5.19
In Stock
Order within the next 4 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Label-choke will fit the following 178 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Grass Trimmer Parts
- Trimmer Parts
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Label-choke
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Fuel system components brittle and broke. Needed carb rebuilt, but complete new carb was cheaper than the kit.
Guy - November 28, 2019
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Torx head tips.
1. Removed the tank.
2. Removed the fuel lines.
3. Removed the carb and associated gaskets.
4. Installed new fuel lines and filter in the tank.
5. Installed the fuel tank.
6. Attached fuel lines to carb.
7. Installed new carb.
8. Installed new spark plug.
9. Added fuel and started blower.
10. Allowed engine to warm and adjusted carb settings, High, low mixture, and idle speed.
2. Removed the fuel lines.
3. Removed the carb and associated gaskets.
4. Installed new fuel lines and filter in the tank.
5. Installed the fuel tank.
6. Attached fuel lines to carb.
7. Installed new carb.
8. Installed new spark plug.
9. Added fuel and started blower.
10. Allowed engine to warm and adjusted carb settings, High, low mixture, and idle speed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carb was not metering fuel properly, and needed rebuilding.
David - July 16, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
- Starter Cover Screw - V202000830
- Fuel Grommet - 13211546730
- Vent Tube - V471001201
- Fuel Tank Vent - A356000031
- Purge Bulb - P005003120
- Fuel Return Tube - 13201056330
- Screw - 90023805016
- Fuel Line - V471001191
- Guard-top - 15991254130
- Cover-engine - 10151448930
- Shield Kit - P021053450
- Tank-fuel - 13100544332
- Repair Kit - 12530042030
- Lid-air Cleaner - 13030206561
- Air Cleaner Case Assembly - P021002921
- Label-choke - 89012106360
Took off the carburetor and disassembled it completely. Cleaned the bare metal body with carb cleaner and blew it dry with compressed air. Rebuilt it with the gasket and reed kit, reinstalled it and then put on the new fuel tank, fuel filter, air filter, tank grommet and new fuel and vent lines. Installed new engine cover, spark plug, vent for fuel tank and head guard.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Echo trimmer 15 yrs old, replacement of broken parts.
Pedro - September 3, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver, Torx bits-small brush-
1. Remove air filter cover, install new choke-run label on new cover, make sure of proper orientation of label.
2. remove/replace air filter, install new cover. save the nut bracket for the future.
3. Using torx bits, remove engine cover, clean inside as necessary.
4. using #2 phillips screwdriver remove two screws for muffler, care not to damage gaskets.
5. Remove muffler cover (broken from metal fatigue)
6. install new cover, place muffler and gasket , replace phillips screws.
7. install engine cover and secure with torx screws.
8. Enjoy another season of weed/grass trimming.
2. remove/replace air filter, install new cover. save the nut bracket for the future.
3. Using torx bits, remove engine cover, clean inside as necessary.
4. using #2 phillips screwdriver remove two screws for muffler, care not to damage gaskets.
5. Remove muffler cover (broken from metal fatigue)
6. install new cover, place muffler and gasket , replace phillips screws.
7. install engine cover and secure with torx screws.
8. Enjoy another season of weed/grass trimming.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
