Easy
15-30 minutes
This is an authentic OEM sourced parts kit that is intended to be used with snowthrowers from Murray, Snapper, and Simplicity. The scraper bar attaches to the rear of the bottom of the auger housing to protect the edge of the housing and to collect snow. The flights attach to the auger axle and are used to gather snow into the impeller.
Kit, Scaper Bar & Flight 1687806
OEM part for: Murray, Snapper, Simplicity
Part Number: 1687806
$133.25
In Stock
Order within the next 8 hours and your part ships today! 
Compatibility
This Kit, Scaper Bar & Flight will fit the following 258 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Snowblower Parts
This part replaces obsolete part #: 1687489, 1687489YP, 1752606, 1752606YP, 1687628YP, 1739727
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
8
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Worked as advertised
Excellent. Parts perfect. Job went smoothly. Now we just need some snow to test it out.
Guest -
December 19, 2023
Verified Purchase
parts were exactly correct
Installation was ok but difficult because bolts rusted badly and allen head screws were corroded and allen wrench were too loose in bolt heads to remove bolts. Would be easier if bolt heads had star type head.
Guest -
December 14, 2021
Verified Purchase
parts were exact fit and was an easy repair
parts were exactly what i needed and arrived very quickly i was so happy to have gotten snowblower fixed
Guest -
February 11, 2021
Verified Purchase
Well done.
Right parts, quick and understandable ordering, and quick enough shipping. I will use you again when parts are needed.
Guest -
October 15, 2020
Verified Purchase
Great replacement part
Received OEM parts perfect fit. High quality.
Guest -
March 31, 2020
Verified Purchase
New ones easy to install, old ones were worn down.
Parts arrived as promised, they fit and were easy to replace. Thank you!
Guest -
December 8, 2019
Verified Purchase
Simple repair
Snowblower suctions like new. Very easy to install, all parts in perfect condition, necessary screws and bolts included.
Guest -
November 13, 2019
Verified Purchase
Snow blower parts
New parts arrived quickly and were easy to install. Thanks!
Guest -
September 24, 2019
Verified Purchase
Easy repair.
Parts arrived quickly. Replacement was easy. Great company for parts.
Guest -
October 27, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Kit, Scaper Bar & Flight
If flight bars are worn (what is considered as time to replace) would this reduce the distance of throwing snow?
Vernon
for model number Ss922ex
asked on 2022-02-08
Hello Vernon, Thank you for the question. If they are showing wear or damage they will need to be replaced. If they are worn, they can not collect and feed the snow into the Auger properly. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team February 08, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Worn parts
Richard - December 10, 2016
👍 5 of 7 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set, Nutdriver, Adjustable Wrench
Parts Used
Place the snowblower on a work bench
Remove the screws from the old paddles, remove the paddles
Remove the nuts and bolts from the scraper, remove the old spacer
Install the new scraper
Remove the screws from the old paddles, remove the paddles
Remove the nuts and bolts from the scraper, remove the old spacer
Install the new scraper
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replace scraper bar and rubber augers
Joseph - December 20, 2023
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, clamps
Parts Used
Remover worn out auger paddles, replace scraper bar. Luckily the screws were not rusted ,so the removal process was easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
plastic bar and worn
James - February 8, 2022
Tool Type
Snowblower
Difficulty
Medium
Time
1-2 hours
Tools Used
Pliers, Power Drill, Socket set, Nutdriver, Adjustable Wrench
Parts Used
remove old and install new. note the position of the metal cross bar. it will go on reversed and go together until you try and push the unit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
flight and cutting edge worn
Steve - January 21, 2021
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, t-27 torxs bit
Parts Used
removed old fasteners and parts, installed new parts and included fasteners
Did you find this story helpful?
Thanks for voting and helping fellow customers!
scraper was worn off and changed the paddles.
Edward - October 27, 2019
Tool Type
Snowblower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver
Parts Used
1. removed old scraper bar. 4 phillips head screws.
2. removed old paddles. 8 security head screws sprayed with wd-40.
3. replaced old paddles with new paddles and used the new security screws supplied with new paddles.
4. replaced the old scraper bar with new one and used the new phillips head screws provided with the kit.
5. changed oil on unit and started it up.
All good.
2. removed old paddles. 8 security head screws sprayed with wd-40.
3. replaced old paddles with new paddles and used the new security screws supplied with new paddles.
4. replaced the old scraper bar with new one and used the new phillips head screws provided with the kit.
5. changed oil on unit and started it up.
All good.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Normal wear and tear on parts need replaced every so often
Matt - October 13, 2019
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Power Drill, Socket set, Nutdriver
Parts Used
Remove four screws for flappers, remove old flappers and replace screws. Done remove four screws for scraper, remove reinforcement plate. Reassemble. Done. The scraper bar did come as bear metal so it was worth giving it a coat of paint so it would not rust
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed new blades and scraper
Paul - September 22, 2018
Tool Type
Snowblower
Difficulty
Easy
Time
1-2 hours
Tools Used
Nutdriver
Parts Used
Removed old.
Replaced with new.
Would recommend removing old blades first, then scraper.
Put new scraper on first then blades.
Replaced with new.
Would recommend removing old blades first, then scraper.
Put new scraper on first then blades.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn out scraper and wheel
william - March 1, 2018
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Torx drive
Parts Used
Removed the old scraper and wheel. Reinstalled the new and tested. No adjustment needed for re installation. System is ready for the next storm
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rubber paddles had broken
Greg - January 17, 2017
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hex bit
Parts Used
1. Removed 6 screws holding old paddle in place
2. Removed old paddle
3. Installed new paddle and secured with existing screws
4. Repeated for other paddle
2. Removed old paddle
3. Installed new paddle and secured with existing screws
4. Repeated for other paddle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Scrapper was worn down along the blades
Daniel - December 29, 2016
Tool Type
Snowblower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Adjustable Wrench
Parts Used
Scrapper bolts were rusted so they were cut off, once that was done it was very easy to install new scrapper, about 5 minutes. The blades would have been easy to remove and replace but the screws were also rusted. Out of the 8 screws, 5 were easy to break loose and remove the other 3 were a little more difficult. Once we got them out, the blades were very easy to install. Overall, the project would have taken 15 minutes in total or less if not for the rusted screws and bolts. The extra time it took to remove those add about 15 minute in time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
