Easy
Less than 15 minutes
This is an original Oster Pro part. This Hinge Assembly is used on multiple models of animal hair clippers. The Hinge is used to help hold the blades into place while in use. This part should be replaced if it has become loose and no longer holds the blade. This part is commonly replaced with the Latch (part number 044938-000-000). To replace the Hinge a Philips head or flat head screwdriver will be needed to remove the screws.
Hinge Assembly 44941000000
OEM part for: Oster Pro, Oster
Part Number: 44941000000
$8.71
In Stock
Order within the next 14 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Hinge Assembly will fit the following 4 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 4 of 4 matching models.
Oster Pro
Oster
4 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Oster
- Oster Pro
This item works with the following types of products:
- Hair Clipper
This part replaces obsolete part #: 44941-000
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
My replacement part
The company has been amazing. Even though the part I ordered I never received because the postal service lost it. They did a great job helping me out.
Jamita -
August 8, 2022
Verified Purchase
great to work with
Had some issues with back orders and incompatible part, but came to a quick solution.
Monte -
July 16, 2022
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Hinge Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blade assembly would not latch in. (2 speed Oster A5 Turbo clippers) broken spring and loose screws sockets.
Tim - May 31, 2018
👍 7 of 7 people found this instruction helpful
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Loctite for screw sockets
First I found that the Latch Assembly screw sockets that hold the latch in place had pulled loose from the clippers aluminum housing. This issue caused the latch from pulling tight against the clipper housing. I wiped the surface clean and took some acetone or (you can use wife's finger nail polish remover) on Q-Tips and cleaned the hole. I took some Loctite and applied it to the hole and screw sockets and let it hardened well. Okay now, I took less than 10 minutes to install the parts purchased. The Parts worked and Clipper work great.
Note: I would check the screw sockets that hold the Latch Assembly in place (they should be flush with clipper housing). This has happened to me before so it might be happen to you.
Note: I would check the screw sockets that hold the Latch Assembly in place (they should be flush with clipper housing). This has happened to me before so it might be happen to you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blades would not seat into the clippers and therefore would not work properly.
Sandi - March 28, 2018
👍 4 of 4 people found this instruction helpful
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the blade assembly from the clippers
2. Removed the old latch and hinge assembly
3. Installed the new latch and hinge assembly.
4. Installed the blade assembly.
5. Tested and found that they are working properly again.
2. Removed the old latch and hinge assembly
3. Installed the new latch and hinge assembly.
4. Installed the blade assembly.
5. Tested and found that they are working properly again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
HINGE ASSEMBLY HAD BECOME WEAKENED AND WOULD FLIP BLADW UP WHEN PUSHED ITINTO MATTED HAIRD
WILLIAM - June 23, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Hair Clipper
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
1. REMOVED 2 SCREWS AND REPLACED HINGE WITH NEW ONE
2. TESTED AND RAN TRIMMER.
3.GAVE MY DOG AN OVER DUE TRIM.
2. TESTED AND RAN TRIMMER.
3.GAVE MY DOG AN OVER DUE TRIM.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Clipper guard was oscillating with the blade
Jevon - March 13, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Hair Clipper
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Replaced latch and hinge, now guard stays stationary while blades cut back and forth. Not sure if I needed to replace both but might as well if you have to order them and take it apart.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the wire for the hinge assembly was bent and did not engage with the latch
Eric - December 14, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Hair Clipper
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
I replaced the old hinge assembly with the new one and engaged the spring extensions with the new latch, tightened the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hinge piece broke on Oster Hair clippers
Craig - October 17, 2018
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Remove two screws , then find two new screws set new hinge w/ clipper holder in place put in new screws. Exciting ,not really but now they work again instead of buying New Oster hair clippers for $140 repair cost under $10.Anyone can do it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The hinge was broken on my clipper
B - March 21, 2018
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed two screws, and replaced the hinge
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hinge assembly.
Louise - June 14, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed the hinge assembly and replaced it with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
