Easy
15-30 minutes
This is a genuine Broil-Mate, Broil King, Huntington, and Sterling part sourced directly from the manufacturer for use in gas grills. The grease shield goes next to the inner rear panel. A wrench and a screwdriver may be necessary during the installation of this item. It may become broken and will need to be replaced. This is made of metal and is available as an individual replacement part.
Grease Shield 27249-904
OEM part for: Broil-Mate, Broil King
Part Number: 27249-904
$6.35
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Grease Shield will fit the following 105 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
This part replaces obsolete part #: 27246-904, 27246-901, 27245-904, 27245-901
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect parts, makes a difference
The shields arrived quickly, fit perfectly and have enhanced the grilling process.
Lawrence -
May 26, 2023
Verified Purchase
All the right parts , fit perfectly
Grill is working like new. Shipping was very slow
Guest -
April 22, 2021
Verified Purchase
Great replacement for the OEM grease shield
I was initially dismayed that I couldn't find a duplicate for my grill's grease shield. The original had rusted through and needed to be replaced. I read that this was a replacement for the one-piece shield, so I ordered 5 to go under the 5 burners in my grill. I did not have to remove the burners, as would have been necessary if I had gotten a new one-piece shield. Each shield simply slid under the burner and my problem was solved.
Joe -
May 5, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Grease Shield
my unit has one grease shield - how many of the 27249-904 do i need ?
Doug
for model number 7120-64
asked on 2023-05-17
Hello Doug, Thank you for your inquiry. You would need 4 to replace the original grease shield and they measure 6.5 inches by 6 inches. We hope this helps.
eReplacementParts Team May 17, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Grease shields were rusted and crumbling
David - September 13, 2021
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, None
Parts Used
Removed grill grates flavorizer bars and removed grease catchers(5). Replaced them and put all parts back
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rusted out parts and ignitor stopped working
Joe - May 6, 2020
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
1. Removed the rusted out parts
2. Removed knobs and face plate
3. Removed old ignitor
4. Installed new ignitor using dielectric grease on wire terminals to prevent corrosion
5. Tested ignitor
6. Installed new grease shields and heat plates, and grease tray and grease cup
7. Installed face plate, knobs.
8. Fired up the grill and allowed it to reach 400 degrees to burn off any manufacturing reside.
2. Removed knobs and face plate
3. Removed old ignitor
4. Installed new ignitor using dielectric grease on wire terminals to prevent corrosion
5. Tested ignitor
6. Installed new grease shields and heat plates, and grease tray and grease cup
7. Installed face plate, knobs.
8. Fired up the grill and allowed it to reach 400 degrees to burn off any manufacturing reside.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Grease shield was rusted out
David - July 21, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Removed grates and burners
2. Cleaned out base of grill and removed rusted out grease shield.
3. Inserted new grease shield.
4. Reinserted burners and grates.
5. Job completed.
2. Cleaned out base of grill and removed rusted out grease shield.
3. Inserted new grease shield.
4. Reinserted burners and grates.
5. Job completed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
