Medium
30-60 minutes
The gear and shaft go between the intershaft and the bearing support. This part is available as an individual replacement. It is a genuine OEM sourced part which is specially designed for use with hedge trimmers made by DeWALT and Black & Decker. During replacement, it may require a screwdriver to help install this item correctly. It is made of metal and will need to be replaced if it becomes broken.
Gear And Shaft As 488059-00SV
OEM part for: DeWALT, Black and Decker
Part Number: 488059-00SV
$9.25
In Stock
Order within the next 7 hours and your part ships today! 
Compatibility
This Gear And Shaft As will fit the following 9 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Black and Decker
Show More Compatible ModelsThis item works with the following types of products:
- Hedge Trimmer Parts
- Trimmer Parts
This part replaces obsolete part #: 488059-00
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gear And Shaft As
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Hedge trimmer blade stopped oscillating.
Craig - May 25, 2018
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Latex gloves and zip lock bag
1. Remove handle and blade guard.
2. Remove all screws. Screw has star and blade slot.
3. Separate two halves.
4. Use latex gloves.
5. Remove all parts from the motor to the blade gear.
6. Remove the grease that is contaminated with iron fillings from the stripped gear.
7. Add half the tube of new grease.
8. Starting at motor, assemble the new parts, slide them into place.
9. Add the remaining grease.
10. At this point, I replaced the switch lock.
11. Assemble the halves and replaces the screws.
The screws are self threading. Turn the screw to the left to feel a little click. Tighten screw.
12. Replace the blade guard and handle.
13. Clean the blade and lubricate it.
14. Test to verify the Hedge Trimmer is running properly.
2. Remove all screws. Screw has star and blade slot.
3. Separate two halves.
4. Use latex gloves.
5. Remove all parts from the motor to the blade gear.
6. Remove the grease that is contaminated with iron fillings from the stripped gear.
7. Add half the tube of new grease.
8. Starting at motor, assemble the new parts, slide them into place.
9. Add the remaining grease.
10. At this point, I replaced the switch lock.
11. Assemble the halves and replaces the screws.
The screws are self threading. Turn the screw to the left to feel a little click. Tighten screw.
12. Replace the blade guard and handle.
13. Clean the blade and lubricate it.
14. Test to verify the Hedge Trimmer is running properly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hedge trimmer cutter would not go back and forth.
Craig - August 21, 2017
Tool Type
Hedge Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Removed all screws to take off guard and handle.
2. Open right side of trimmer to expose gears, Support the blade while you do the repair.
3. Removed stripped gear and bearings.
4. There is a lot of grease in the gear compartment.
5. You may have to remove/replace the grease because of metal filings from stripped gear.
6. Install the new gear and bearings.
7. Replace right side of trimmer.
8. Replace screws. Turn the screw to the left until you feel a click, then tighten.
9 Replace the guard and handle.
10. Clean the blade with WD-40.
Works like new.
2. Open right side of trimmer to expose gears, Support the blade while you do the repair.
3. Removed stripped gear and bearings.
4. There is a lot of grease in the gear compartment.
5. You may have to remove/replace the grease because of metal filings from stripped gear.
6. Install the new gear and bearings.
7. Replace right side of trimmer.
8. Replace screws. Turn the screw to the left until you feel a click, then tighten.
9 Replace the guard and handle.
10. Clean the blade with WD-40.
Works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
