Easy
30-60 minutes
This is a genuine replacement gasket which is supplied by the original manufacturer, it is specially designed for use with Subaru/Robin engines commonly installed on lawn and garden equipment. It provides an air-tight seal for the muffler, over time it may begin to deteriorate and crack eventually requiring replacement to ensure the proper seal. This part is made of high-quality material and it is sold individually.
Gasket(muffler) 277-35201-13
OEM part for: Subaru / Robin
Part Number: 277-35201-13
$3.99
Factory Backorder
Date Available: Unknown 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket(muffler) will fit the following 480 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Subaru / Robin
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
This part replaces obsolete part #: 277-35201-13R, 277-35201-03
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket(muffler)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Gas was leaking out of my Robin carburetor on my Subaru engine on my Rigid Pressure Washer.
Norman - July 31, 2020
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
1. Drained the fuel tank
2. Removed air cleaner assembly
3. Removed carburetor assembly and fuel line
4. Replaced muffler and associated parts
5. Replaced gaskets and o-rings in carburetor and started reassembly
2. Removed air cleaner assembly
3. Removed carburetor assembly and fuel line
4. Replaced muffler and associated parts
5. Replaced gaskets and o-rings in carburetor and started reassembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old muffler rusted out
greg - November 17, 2016
Tool Type
Engine
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Remove the three bolts and remove old gasket and muffler.
Replace the new gasket and the new muffler with the three bolts
Replace the new gasket and the new muffler with the three bolts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hard to crank. Then would run very rough, carburetor
RICK - June 17, 2016
Tool Type
Engine
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver
Parts Used
- Bowl Gasket - 214-62540-08
- Fuel Filter - X64-13600-10
- Gasket(muffler) - 277-35201-13
- Packing - 277-32604-08
- Union - 050-51200-20
- Needle - 277-62500-08
- Rocker Cover Gasket - 277-16001-23
- Gasket2(insulator) - 20A-35903-03
- Insulator Gasket - 20A-35902-03
- Cup - 277-62100-18
- Hose Clamp - X56-11100-60
- Insulator - 20A-32902-01
Remove the air cleaner assembly. ereplacementparts has a you tube video on this subject. Here it is https://www.youtube.com/watch?v=faM2nla4_u4 . Empty the fuel from the tank or use some tube clamp pliers to stop the flow of fuel. Remove the carburetor from the engine. Remember where the spring and throttle where located. Then start removing the parts from the carb. and laying them on a clean towel. Once all the parts are off, clean the carb. with carb, cleaner. I did use some fishing line to clean out the small passages. Once it was clean and dry, I started to assemble it. I replaced the needle, cup and bowl o-ring. Then installed the float bowl with the o-ring and bolt. Installed the insulator with the gaskets on both sides of it. I then installed the new union and all of the parts attached to it. I removed the muffler, then the gasket and cleaned the area before I installed the new muffler gasket.
Removed the rocker arm cover and replaced the gasket beneath it. Installed a new fuel filter in the tank. Then before I installed the air cleaner, I exchanged the old packing (gasket) for the new one.
Running great again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
