Easy
30-60 minutes
This is an authentic replacement part manufactured for use with Briggs and Stratton small engines. The special intake gasket seals the connection between the breather tube and carburetor. It is recommended to replace the gasket when servicing the carburetor, or air cleaner to assure a good seal when reinstalling the parts. The intake gasket is sold individually.
Gasket-intake 692555
OEM part for: Briggs & Stratton Engines
Part Number: 692555
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket-intake will fit the following 14502 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Briggs & Stratton Engines
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Always have what I need.
Ereplacement parts always have what I need and gets it shipped to me quickly.
Timothy -
March 24, 2022
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket-intake
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replced Carburetor
Everett - May 22, 2020
Tool Type
Engine
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set, None
Parts Used
Took old Carburetor off and replaced with new one. Replaced all 3 gaskets
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dirty carb and fuel tank.
James - May 18, 2020
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Removed and cleaned carb and fuel tank. Overhauled the carb then put it all back together. All went well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carbureor replacement
Everett - April 13, 2020
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
Was easy to take old carburetor off and replace with new carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The carb was gummed up and needed cleaned.
David - June 5, 2019
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set, Wrench Set
Removed the carb
Removed the carb bowl and used carb cleaner on the jets.
Blew compressed air through the jets.
Confirmed the needle valve was functioning properly.
Re-installed the carb
Replaced the governor spring
Primed and started the engine.
Removed the carb bowl and used carb cleaner on the jets.
Blew compressed air through the jets.
Confirmed the needle valve was functioning properly.
Re-installed the carb
Replaced the governor spring
Primed and started the engine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rickey - October 5, 2018
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, old tupperware pan for parts
Briggs& Stratton motor 190cc on craftsman brand mower
1. Removed rope pull mechanism cover air breather. several 5/16 hex screws
2. Removed springs from carburetor choke mechanism.
3. Removed fuel line and fuel tank used 3/8 bolt to plug fuel line. Drained carb into cup.
3. Removed engine cover to have access to auto choke and carburetor.
4. Removed carburetor two bolts.
5. Removed carburetor float bowl,float and needle.
6. Removed existing rubber seat below needle. used e-part number kit 398188 (see e-part diagram).
7. Reassembled all parts. added Fresh Non-Ethanol gas. Runs as good as when it was new. No more surging. No other adjustments needed. Thanks e-replacement parts!
1. Removed rope pull mechanism cover air breather. several 5/16 hex screws
2. Removed springs from carburetor choke mechanism.
3. Removed fuel line and fuel tank used 3/8 bolt to plug fuel line. Drained carb into cup.
3. Removed engine cover to have access to auto choke and carburetor.
4. Removed carburetor two bolts.
5. Removed carburetor float bowl,float and needle.
6. Removed existing rubber seat below needle. used e-part number kit 398188 (see e-part diagram).
7. Reassembled all parts. added Fresh Non-Ethanol gas. Runs as good as when it was new. No more surging. No other adjustments needed. Thanks e-replacement parts!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaf vacuum engine would stall out, cleaned carb out to rough probably wrecked gas intake
Mark - October 14, 2017
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver
Parts Used
Remove air intake filter attached to carburetor. Remove two small bolts holding carb, note spacer will be reused. Disconnect idle rod and spring, replace old with new carb in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blew a head gasket
Joe - June 24, 2016
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Nutdriver
Parts Used
- Gasket-intake - 692555
- Gasket-float Bowl - 693981
- Washer-sealing - 271716
- Filter-a/c Cartridge - 697029
- Gasket-exhaust - 691893
- Gasket-rocker Cover - 691890
- Armature-magneto - 590454
- Gasket-cylinder Head - 697230
- Gasket-intake - 692668
- Gasket-intake - 697735
- Plug-spark - 692051
- Filter-fuel - 298090S
Tripped head off, inspected all parts, cleaned carburetor bowl while I had it off the engine.
I checked to make sure head and cylinder surface wasn't warped, de-carboned piston top and head. Re-assembled.
This type of repair is pretty straight forward.
If your new to this, keep nuts and bolts organized, and it goes easy!!
I checked to make sure head and cylinder surface wasn't warped, de-carboned piston top and head. Re-assembled.
This type of repair is pretty straight forward.
If your new to this, keep nuts and bolts organized, and it goes easy!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
