Medium
30-60 minutes
This part is an OEM from the Kawasaki manufacturer. The carburetor gasket is constructed of a cardboard composite, and is made for use with many 4 stroke engines.
On the manifold-intake, a carburetor gasket is fitted on each side of the insulator. Keep in mind this item is sold individually. The gasket has been designed to prevent damage to engine parts and absorb fuel leakage. A screwdriver and a wrench may be needed to make the removal and replacement. This part is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.
Gasket-carburetor 11060-7024
OEM part for: Kawasaki
Part Number: 11060-7024
$12.09
In Stock
Order within the next 7 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Gasket-carburetor will fit the following 907 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Kawasaki
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket-carburetor
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
no fuel getting to engin
anthony - May 11, 2021
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
removed carb from engine, gaskets ripped from face and after cleaning the float gasket was warped. cleaned all jets and re installed parts once the arrived
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wouldn't run at full throttle unless choke was used
Richard - March 5, 2018
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Scraper
1. Removed carburetor
2. Took carb apart
3. Cleaned all surfaces
4. Removed jets and replaced with new
5. Blew out all jets with air hose
6. Put back together using new gaskets
7. Filled carb and flushed through bowl drain.
8. Closed drain, started mower motor.
2. Took carb apart
3. Cleaned all surfaces
4. Removed jets and replaced with new
5. Blew out all jets with air hose
6. Put back together using new gaskets
7. Filled carb and flushed through bowl drain.
8. Closed drain, started mower motor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
O-ring seals in float bowl were spent and replaced gaskets were replaced as needed
Wallace - November 26, 2017
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set
Removed the two bolts holding the mower motor cover on. Removed the 2 wing nuts holding the air cleaner cover on. Removed the two wing nuts holding the air breather filter and removed it. Removed the choke and throttle linkages, Removed the fuel line from the top of the carburetor. Removed the 4 bolts /screws holding the carburetor on, and removed the crankcase vent line.
Unplugged the solenoid needle valve from bottom of float bowl. Removed the two ,float bowl screws and replaced the bad o-rings and seals. reassembled and mowed.....
Unplugged the solenoid needle valve from bottom of float bowl. Removed the two ,float bowl screws and replaced the bad o-rings and seals. reassembled and mowed.....
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Accidentally place mixed oil in engine Carb was completely black and heavy soot
Brian - May 28, 2017
Tool Type
Engine
Difficulty
Medium
Time
More than 2 hours
Tools Used
, Many tools
Torro z master comercial grade. Had to dissasemble e frame, exhaust, move hydralic out of the way to free the carb Then clean and rebuild the carb. On side note picked up tip on web, the chemicals definitely have to be handled careful and the fumes can be an issue too. Used pinesol ORIGINAL NO STORE brand is important, let soak 24 hours it came out spotless, no dangerous chemicals and you can pour it down your drain. You need a small toothbrush to get nooks and crannies. Would suggest this unless you are tight on time an have a deadline to meet. My carb was covered in heavy soot, carb and choke cleaner would not remove it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
