Medium
30-60 minutes
It is a genuine OEM sourced replacement gasket that is specially produced for BUNN tea and coffee brewers. This is the gasket that provides an air tight seal between the lid and the tank. Over time it may get compressed or worn eventually requiring replacement. Please note one durable silicone gasket is included per order.
Gasket, Tank Lid 04221.0000
OEM part for: BUNN
Part Number: 04221.0000
$7.84
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket, Tank Lid will fit the following 42 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 42 matching models.
42 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- BUNN
This item works with the following types of products:
- Coffee Maker
- Tea Maker
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket, Tank Lid
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Coffee maker was popping breaker
Larry - February 4, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Nutdriver
1. Removed top of coffee maker.
2. Removed wires from top warmer.
3. Removed nut in bottom of water collection tray.
4. Removed water collection tray.
5. Removed nuts holding thermostat rack and moved rack to the side.
6. Removed wires from tank heater on thermostat rack.
7. Removed spray head and nut on water flow tube.
8. Removed all nuts from top of water tank and flow tube.
9. Removed top of water tank.
10. Removed nuts from heater element on top of water tank.
11. Removed limit thermostat from top of water tank.
Replaced all gaskets and reinstalled all items in reverse order of tear down.
NOTE: Make sure you delime all internal parts while you have it apart and rinse well with vinegar and water.
NOTE: Do not plug coffee maker in until you fill the water tank and water flows out the flow tube after you put everything back together.
2. Removed wires from top warmer.
3. Removed nut in bottom of water collection tray.
4. Removed water collection tray.
5. Removed nuts holding thermostat rack and moved rack to the side.
6. Removed wires from tank heater on thermostat rack.
7. Removed spray head and nut on water flow tube.
8. Removed all nuts from top of water tank and flow tube.
9. Removed top of water tank.
10. Removed nuts from heater element on top of water tank.
11. Removed limit thermostat from top of water tank.
Replaced all gaskets and reinstalled all items in reverse order of tear down.
NOTE: Make sure you delime all internal parts while you have it apart and rinse well with vinegar and water.
NOTE: Do not plug coffee maker in until you fill the water tank and water flows out the flow tube after you put everything back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaked and calcium build up.
Gary - June 8, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Cleaned and installed new gaskets
Did you find this story helpful?
Thanks for voting and helping fellow customers!
LOL. It's 25 years old in a church Activity Center. The reservoir was 50% full of Calcium deposit
Charles - January 12, 2018
Tool Type
Coffee Maker
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Basically removed the reservoir and cleaned out all the calcium, deposits, adjusted the thermostat to a less hot setting, replaced all the gaskets and it's a 100% win. New unit like ours would run $500-$600 dollars easy. Repaired this one on less than $40.00. Super satisfied.
Also, my grateful thanks to your company for the EXCELLENT SERVICE and the correct parts. You folks are super.
Many Thanks!!
Also, my grateful thanks to your company for the EXCELLENT SERVICE and the correct parts. You folks are super.
Many Thanks!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
