This is a genuine OEM sourced replacement part designed for Hitachi nailers/staplers. This gasket provides an air-tight seal for the exhaust cover. Over time this gasket will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of rubber material and it is sold individually.
Replacing this item you would need a screwdriver.
Gasket (f) 883892
OEM part for: Metabo HPT
Part Number: 883892
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Gasket (f) will fit the following 26 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Metabo HPT
Show More Compatible ModelsThis item works with the following types of products:
- Nailer Parts
- Stapler Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket (f)
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Leaking air from exhaust pirt
Tool Type
Stapler
Difficulty
Medium
Time
30-60 minutes
Tools Used
, Allen wrench(metric)
Removed exhaust deflector
Replaced all pets in head
Hard time removing part on outside of cylinder so I could replace o-ring between cylinder.
Found taped holes in part I couldn’t remove, screwed in two screws from head removal and could pull part out.
Replaced cylinder o-ring
Put back together
Still leaked from exhaust port
Disconnected from air supply and reconnect to air supply while holding trigger down.
Heard plop of driver returning to top
Air leak quit and stapler works great
Don’t know if any of the parts repaired the leak, moral of the story, try connecting to air supply while holding trigger
Air leaks
Tool Type
Stapler
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Piston bumper was shredded
Tool Type
Stapler
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Air leak, driver not returning.
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Nutdriver
Piston driver not returning
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set, Wrench Set
Applied grease where needed, assembled and tested. Worked perfect.
Unable to fully drive nails.
Tool Type
Nailer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Allen wrenches, roll pin punch, mallet, gasket scraper
2.Cleaned all parts.
3. Assembled with the new parts.
Driver broke
Tool Type
Stapler
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench
Massive air leak from blown head cap gasket
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrenche
Parts Used
2. Remove exhaust plate.
3. Take out head cap.
4. Replace exhaust valve into new head cap.
5. Use screws for exhaust cove to attach head cap.
6. Place new gasket on body.
7. Reinstall head cover.
Nail guns were not feeding nails, one had an inlet broken
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, paint brush, degreser
removed feeder spring, and installed the new one, I put everything together the opposite order as I started, I tested them, (because I fixed 3 of them, and they all worked as new. I'm happy.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.