Medium
30-60 minutes
It is an authentic OEM supplied component which is designed for Hitachi nailers. This is one of the gaskets for the exhaust piece. It is a high-quality replacement for a compressed, cracked or a missing part that was installed on a new tool. When performing this repair, it is advised to refer to the parts diagram for your model to ensure the correct procedure. Note, this gasket is made of durable composite material and is sold as an individual item.
Gasket (f) 877329
OEM part for: Metabo HPT
Part Number: 877329
$4.99
In Stock
Order within the next 4 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket (f) will fit the following 27 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 27 matching models.
Metabo HPT
Show More Compatible Models27 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Metabo HPT
This item works with the following types of products:
- Nailer
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket (f)
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
framing nailer was leaking air when connected to air hose
Roger - December 28, 2021
Tool Type
Nailer
Difficulty
Medium
Time
1-2 hours
Tools Used
, allen wrench set, O ring pic, 8mm wrench, hammer, punch.
Dismantled entire gun piston bumper was breaking into small pieces causing air leak. I use my nail guns daily therefore when something like this happens I always do a complete rebuild, in this case the front bumper was also bad. I always allow a few hours thoroughly clean, inspect and rebuild everything properly to extend the time between rebuilds. recommendations: Take your time be patient, drink a beer if necessary and make it like brand new.
P.S. DO NOT REUSE OLD PARTS SUCH AS GASKETS, ROLLED PINS, ETC. CHEERS AND HAVE FUN!
P.S. DO NOT REUSE OLD PARTS SUCH AS GASKETS, ROLLED PINS, ETC. CHEERS AND HAVE FUN!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The Hitachi nailer NR83A2 (S) would not drive nails all the way in.
Tarael - November 8, 2020
Tool Type
Nailer
Difficulty
Hard
Time
More than 2 hours
Tools Used
Wrench Set, Metric Allen wrench set
Not knowing what I would need before I tore it apart - I ordered a "complete" O-ring set from ebay because it was not available on ereplacementparts.com. It contained all of the orings for the lower part of the gun, and the nylon trigger ball, but not the exhaust on the top. I completely disassembled the gun including the trigger assembly with the exception of the top exhaust head. There were more than 20 o-rings to replace and lube inside. I found two damaged or broken but replaced them all. When it was re-assembed it still did not drive nails all the way. So I took apart the exhaust section and found the exhaust valve cracked and broken. I ordered this and the two gaskets from ereplacementparts.com and replaced them when they came. Now it works fine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Upper air leak
Robert - October 25, 2020
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrenches
Remove the top head of the gun ! Than remove the three bolts from the head piece and then the head inner prices will come apart. Clean up in side of the head and install the new parts !
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Internal plastic parts & O rings plus gaskets disintegrated
RON - October 9, 2018
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Removed all screws
Removed head
Removed piston
Changed out o rings
Cleaned up gasket surfaces,.
Installed new parts
Added oil and tested gun.
Removed head
Removed piston
Changed out o rings
Cleaned up gasket surfaces,.
Installed new parts
Added oil and tested gun.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nail gun was not sinking nails and air started to leak from gaskets. The piston bumper had broken to pieces and the gaskets had worn out.
Jose - May 20, 2018
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Power Drill, Socket set, Wrench Set, Nutdriver
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nailgun leaked air.
Carlos - January 30, 2018
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Wrench Set, Scraper blade
Took apart and replaced the parts. Reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Air leak in upper chamber of air nailer
James - October 27, 2017
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench, putty knife and air compressor
Removed exhaust cover and exhaust piece
Removed old gaskets and clean housing and piece of damaged gaskets
Replaced new gaskets and exhaust valve part #884-110
Replaced Head Cap and gasket
Reinstalled all parts and exhaust cover
Removed old gaskets and clean housing and piece of damaged gaskets
Replaced new gaskets and exhaust valve part #884-110
Replaced Head Cap and gasket
Reinstalled all parts and exhaust cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nailer was leaking air and would not operate correctly.
Harry - April 28, 2017
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Disassembled the top side of the nailer and inspected components for damage. Found head cap was damaged. Researched the replacement parts, ordered and installed the new head cap and the gaskets. Tested the nailer, held the air pressure and operated just fine. Schematic explosion helped in ordering correct replacement parts. Thanks. Saved a $500 nailer.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nailer broke
Jessie - December 13, 2016
Tool Type
Nailer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
Take out old part put in new ones
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
