Medium
15-30 minutes
Field 110v 2610013921
OEM part for: Dremel
Part Number: 2610013921
$32.22
In Stock
Order within the next 4 hours and your part ships today! 
Compatibility
This Field 110v will fit the following 9 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Dremel
Show More Compatible ModelsThis item works with the following types of products:
- Oscillating Tool Parts
- Multi-Tool Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Field 110v
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Dremel MM20 Multi-Tool- Would not run
Paul - July 24, 2021
Tool Type
MultiTool
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Torx screwdriver and multimeter
Parts Used
Disassembled tool and tested components. Found open circuit in motor field coil. Ordered new set from ereplacementparts.com. Installed new field coils and reassembled tool. Tested, and works like a charm! Have ordered parts from ereplacementparts for several years now. Convenient and easy to use website makes it easy to order parts. And they are shipped right to the house. No hassles or driving all over town looking for parts. Great place to get parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dremel Multi Max MM20 Stopped Working
Michael - May 24, 2019
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Piece of wire with tight hook on end to help pull wires.
Parts Used
1) Removed the bottom plate by unscrewing three (3) screws and setting aside.
2) Removed side plastic plates by sliding up and out, which exposes the wiring and rotors fully.
3) Removed front end piece and motor winding by unscrewing four (4) screws and set aside.
4) Removed front end plastic ring that keeps the Field 110V sections in place by unscrewing single screw and set aside.
5) Disconnected four (4) wires plugged into switched . Prior to unplugging I took a picture on my phone to insure the new wires were plugged in correctly. The photo also showed how each wire was routed in the unit.
6) Gently slid the old Field 110V unit (two pieces) out and slid the replacement unit in, which fit perfectly, making sure the four (4) wires were inserted in the same spaces as the previous wires.
7) Rerouted the wires and plugged them into the switch.
8) Put the front plastic ring in and secured it with the same screw.
9) Inserted the motor winding and front end of the unit and secured it with the four (4) screws.
10) Reset the two plastic side piece panels by sliding them into place.
11) Replaced the bottom plate and secured with the three (3) screws.
12) Plugged in the unit, turned it on and it runs great.
2) Removed side plastic plates by sliding up and out, which exposes the wiring and rotors fully.
3) Removed front end piece and motor winding by unscrewing four (4) screws and set aside.
4) Removed front end plastic ring that keeps the Field 110V sections in place by unscrewing single screw and set aside.
5) Disconnected four (4) wires plugged into switched . Prior to unplugging I took a picture on my phone to insure the new wires were plugged in correctly. The photo also showed how each wire was routed in the unit.
6) Gently slid the old Field 110V unit (two pieces) out and slid the replacement unit in, which fit perfectly, making sure the four (4) wires were inserted in the same spaces as the previous wires.
7) Rerouted the wires and plugged them into the switch.
8) Put the front plastic ring in and secured it with the same screw.
9) Inserted the motor winding and front end of the unit and secured it with the four (4) screws.
10) Reset the two plastic side piece panels by sliding them into place.
11) Replaced the bottom plate and secured with the three (3) screws.
12) Plugged in the unit, turned it on and it runs great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wire to magnet field broke
David - December 14, 2018
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Nutdriver, None
Parts Used
Remove front of saw and pull out magnetic fields together. Put in new fields hook up to spades and reassemble front.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Copper wire broken from magnet field
David - February 22, 2017
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Star bits
Parts Used
I took the multi tool apart and found that the copper wire was broken. Ordered the replacement part one replacement. Took less than 30 minutes to put back together. Works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
