Easy
Less than 15 minutes
This is a Genuine OEM sourced replacement part designed for use with Staplers/Nailers. With this Exhaust Cover you can divert the air in any direction you want. It is made out of Plastic and it is Sold Individually. Please note Flange Nut used to secure the Cover is Sold Separately.
To replace this item you would need a Hex Key/Allen Wrench.
Exhaust Cover P0590000200
OEM part for: Bostitch, Porter Cable
Part Number: P0590000200
$4.99
In Stock
Order within the next 7 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Exhaust Cover will fit the following 23 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Stapler Parts
- Nailer Parts
This part replaces obsolete part #: JA1162E1
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
35
4 stars
2
3 stars
1
2 stars
0
1 stars
1
< PREV
- 1
- 2
- 3
Bostitch stapler
Parts arrived in timely manner and were as described. Have been a past customer and still happy with their service.
Guest -
April 21, 2024
Verified Purchase
Good as new
Perfect, receive here early then expected. Part were correct.
Guest -
March 9, 2024
Verified Purchase
Right parts
Correct parts, fast delivery!
Guest -
March 7, 2024
Verified Purchase
Quick and easy
Simple replacement to repair as good as new again
Guest -
November 6, 2023
Verified Purchase
Good Fit
After one nail from my brad nail gun and "POOF" it stopped working slowing up the job. Lucky for me eReplacment Parts had the parts, shipped them quickly and now I am back in"bidness". Easy fix.
Patrick -
July 13, 2023
Verified Purchase
Repair went great with your help!
I received the parts packaged well and installation went as expected.
Stanley -
July 6, 2023
Verified Purchase
Part worked perfectly!
Part worked perfectly!
Guest -
May 22, 2023
Verified Purchase
easy fix and worked as expected
ordered 2 parts to fix an old brad nail gun - they arrived quickly - fit good and easy to install - now nail gun works as new - much cheaper than a new gun - this exhaust cover was not a problem with the gun working but needed replaced, it was deteriorating and crumbling into pieces - the other part is what kept the gun from working and was causing an air leak - both parts (awesome)
Guest -
May 16, 2023
Verified Purchase
easy to install
easy to install
John -
May 15, 2023
Verified Purchase
Easy fix for a nailer
Nice to be able to fix a broken tool easy to order parts and fast service will keep my tools working for sometime Thank you
Guest -
February 22, 2023
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Exhaust Cover
Will this part P0590000200 fit the SB-1850BN
Butch
for model number SB-1850BN
asked on 2023-02-21
Hello Butch, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. We hope this helps.
eReplacementParts Team February 21, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Exhaust cover broke in two.
Douglas - July 24, 2017
👍 6 of 7 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Removed the head assembly.
2. Removed the inner workings of the head.
3. Removed the exhaust cover and installed the new one.
4. Reassembled the head.
5. Reinstalled the head.
2. Removed the inner workings of the head.
3. Removed the exhaust cover and installed the new one.
4. Reassembled the head.
5. Reinstalled the head.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Exhaust cover was worn out and came apart and safety pad was missing.
Michael - December 6, 2016
👍 3 of 4 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench set.
1. Removed socket head bolts to access the Phillips head screw that secures exhaust cover with flange nut.
2. Removed what was left of the old exhaust cover, cleaned seal cavity and installed new exhaust cover.
3. Reassembled deflector with the socket head bolts. The repair went very smoothly.
4. Installed new safety pad.
2. Removed what was left of the old exhaust cover, cleaned seal cavity and installed new exhaust cover.
3. Reassembled deflector with the socket head bolts. The repair went very smoothly.
4. Installed new safety pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Exhaust cap broke on top of nailer
David - July 8, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Popped the old cap off and snapped the new one in place, easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The plastic exhaust port cover was broken
Bob - July 22, 2020
Tool Type
Nailer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Broken part fell off, then Jim removed the hold down screw and put new port on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Value head bad
robert - July 4, 2020
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Nail gun
Parts Used
With my hands
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Deteriorated exhaust cover on Bostitch 1850bn
Robert - May 22, 2020
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
1. Removed 4 hex screws on top housing of 1850bn
2. Removed top housing and a few parts that were inside the housing.
3. Removed exhaust cover center/hold down screw (Phillips) & flanged nut.
4. Installed new exhaust cover onto housing.
5. Replaced all parts and housing....done.
2. Removed top housing and a few parts that were inside the housing.
3. Removed exhaust cover center/hold down screw (Phillips) & flanged nut.
4. Installed new exhaust cover onto housing.
5. Replaced all parts and housing....done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dropped nailer and broke plastic exhaust cover.
Bob - March 9, 2019
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Remove screw in center of exhaust cover.
2. Discard broken exhaust cover.
3. Locate new exhaust cover.
4. Reinstall exhaust cover screw.
2. Discard broken exhaust cover.
3. Locate new exhaust cover.
4. Reinstall exhaust cover screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cracked exhaust cover
Richard - February 6, 2019
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
Took off the top 4 screws with a Allen wrench. Inside removed the screw cover with a small Phillip's screwdriver. Reassemble and shot some Brad's. It' worked great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Exhaust cover cracked and fell off
harold - December 13, 2018
Tool Type
Stapler
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Allen\\\'s wrench
Parts Used
Took off the end cap. Unscrewed the center retainer pin. Replaced exhaust cover and end cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Exhaust relief blew off
shawn - December 6, 2018
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, hex allen set
Removed cracked exhaust relief from top of nailer
removed top of nailer
disassembled top inner components
drilled out existing screw, frozen in place :(
popped in replacement exhaust relief plate
put in new flange nut and screw to hold in exhaust relief
assembled top inner components
put top of nailer back on
tested nailer, perfect!
removed top of nailer
disassembled top inner components
drilled out existing screw, frozen in place :(
popped in replacement exhaust relief plate
put in new flange nut and screw to hold in exhaust relief
assembled top inner components
put top of nailer back on
tested nailer, perfect!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
