This is a genuine manufacturer sourced replacement part used on Waring blenders. The coupling is the part of a blender that transfers power from the blender's motor to the blade assembly. Over time, the teeth on blender coupling wear down until they no longer engage properly on the blade assembly. It is made out of plastic and it is sold individually.
Coupling 014009
OEM part for: Waring
Part Number: 014009
Jump To:
Frequently Purchased Together ?
Compatibility
This Coupling will fit the following 158 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Waring
Show More Compatible ModelsThis item works with the following types of products:
- Blender Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Coupling
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blender ran but blades would not turn with food.
Tool Type
Blender
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
- Holding coupling with fingers and pulling up, it was partially stripped
- Held screw under the blender motor with screwdriver and removed coupling
- Screwed new coupling on.
done
Female threads on coupling stripped. Top plate surface finish worn.
Tool Type
Blender
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
1. Coupler unable to be unscrewed from motor shaft due to stripped threads.
2. Used Dremel rotary tool with abrasive cutoff wheel to carefully cut coupler off of motor shaft.
Removal of top plate
1. Remove three screws securing bottom cover plate.
2. Remove four nuts securing top cover plate.
3. Remove and replace top plate.
4. Replace bottom cover.
Screw replacement coupler onto motor shaft. Use straight blade screw driver to drive motor shaft and secure to coupler.
Blade coupler was worn
Tool Type
Blender
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Piece. Had worn down blade not spinning
Tool Type
Blender
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Parts Used
Threads stripped in the impeller
Tool Type
Blender
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, None
Parts Used
The motor was failing and some part were worn
Tool Type
Blender
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Nutdriver
Parts Used
Original coupler stripped threads
2. Reverse threaded coupler installed using counter-clockwise rotation.
3. Finger tighten only. Will tighten more with use.
4. You are done.
Metal shavings from imbedded coupling nut, noisy
Tool Type
Blender
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Blade screw was stripped out
Tool Type
Blender
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hands
Parts Used
The threads on the screw stripped.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.