Easy
30-60 minutes
This part comes directly from Breville. This Core Gear is used in the Breville 800CPXL Citrus Press. This Gear is made of a hard plastic and is one of three gears that drive the Reamer (part number SP0000024). If the Reamer stops turning while the motor is still on, then one of the gears have stripped out and have lost teeth. Replacing the Gear will require the use of a Philips head screw driver.
Core Gear SP0000045
OEM part for: Breville
Part Number: SP0000045
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Core Gear will fit the following 1 machine. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Breville
This item works with the following types of products:
- Juicer Parts
This part replaces obsolete part #: 800CPXL/30, 800CPXL30
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great part. Did fit just well.
My juicer is working like new again :-)
iGlobal -
May 30, 2023
Verified Purchase
Excellent site for parts, keep it up!
Not only that I did not expect to find this part but, works excellent.
Guest -
May 24, 2022
Verified Purchase
Perfect replacement part
I echo the reviewer on procedures for installation. Added a little grease between the rubber motor mount and its footing to hold it in place as I put everything back into order.
Good product.
Guest -
December 21, 2020
Verified Purchase
this is the part that i expected
this is an international shipment and the part arrive in good condition, on time and it is the rigth one.
thank you.
iGlobal -
October 28, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Core Gear
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The core great was striped
Ivan - September 8, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Juicer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Removed the 3 screws at the bottom of the juicer.
2. Removed the lit and disengage the wiring.
3. Removed the screws on top of the motor.
4. Open the motor and pop the gear out.
5. Replaced and reassembled.
2. Removed the lit and disengage the wiring.
3. Removed the screws on top of the motor.
4. Open the motor and pop the gear out.
5. Replaced and reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nylon Core Gear broke
djordje - January 5, 2021
Tool Type
Juicer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Impact Driver (essential for this repair)
In order to open the device I removed 4 screws from the base. This was the most difficult task. In order not to ruin the screws I used Impact driver and torque bit. The same tools are needed to replace the screws. The other part of the repair was easy and involved removing 4 screws to remove the gear cover and replacing broken gears with the new ones and lubricating.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Core Gear had stripped
Dewey - October 20, 2019
Tool Type
Juicer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Small punch to remove the handle pins
Parts Used
1. Remove the bottom plate from the unit covering the power cord entry (2 screws).
2. Remove the three screws holding the case and motor together.
3. Remove the top casing. I disconnected the wire to the engage switch.
4. Remove the old gear.
5. Clean any nylon chips from the gear cavity.
6. Lubricate the new gear and replace it. I used grease from the cavity.z
7. Reconnect the engage switch wire.
8. Position the motor (there is a rubber bumper that needs to be placed correctly).
9. Position the top plate onto the case.
10. Replace the case screws.
11. Replace the bottom plate.
12. I removed the handle and cleaned the juice splatter from the inside portion of the handle, you have to push in the spring loaded catches to do this.
2. Remove the three screws holding the case and motor together.
3. Remove the top casing. I disconnected the wire to the engage switch.
4. Remove the old gear.
5. Clean any nylon chips from the gear cavity.
6. Lubricate the new gear and replace it. I used grease from the cavity.z
7. Reconnect the engage switch wire.
8. Position the motor (there is a rubber bumper that needs to be placed correctly).
9. Position the top plate onto the case.
10. Replace the case screws.
11. Replace the bottom plate.
12. I removed the handle and cleaned the juice splatter from the inside portion of the handle, you have to push in the spring loaded catches to do this.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
