Medium
1-2 hours
This part comes directly from KitchenAid. This Power Cord is a black, three wire, 18 awg cord. This part needs to be replaced if any wire has been exposed from the outside of the cord. This Power Cord goes to all six quart mixers. To replace this part, the motor housing will first need to be removed. Next, the Transmission housing will also need to be removed. Then, the Motor (W10247536) will need to be taken out. After that, the lower gear casing can be removed from the pedestal by unscrewing three Philips head screws. Once this is all done the cord can be replaced.
Cord-power W11359747
OEM part for: KitchenAid
Part Number: W11359747
$42.13
In Stock
Ships within 1 business day 
Compatibility
This Cord-power will fit the following 235 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
KitchenAid
Show More Compatible ModelsThis item works with the following types of products:
- Mixer Parts
This part replaces obsolete part #: W11157087, W11157087, WPW10325656, W10325656, W10164888, 9706552
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord-power
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Power cord broken
Harriet - January 28, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Mixer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Gaining access to remove the old power cord was the biggest challenge. It is not as simple as your video makes it look, not if you have a newer model mixer. There is no back cover to remove anymore - you have to remove the entire cover, unscrew over a dozen screws and remove almost all of the mechanical parts inside. Once I did that, it was straightforward to remove and replace the cord.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Planetary gear and internal drive ring
Gary - April 5, 2016
Tool Type
Mixer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Snap ring pliers
I followed the video from the www.ereplacementparts.com web site and all went well. You will need snap ring pliers to do this project in two different places. A good set will be well worth it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
