Medium
30-60 minutes
It is a genuine item which is made for use with Porter Cable power tool. This part is supplied directly from the original equipment manufacturer. It is a special component which helps to connect two lead wires. The part is utilized to connect the on/off switch to the tool. It is a simple plastic item which is sold individually. Replacing it will only require a screwdriver, take apart the housing, remove the old part and secure the wires using the new connector.
Connector 682063
OEM part for: Porter Cable
Part Number: 682063
$4.99
In Stock
Order within the next 2 minutes and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Connector will fit the following 391 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Porter Cable
Show More Compatible ModelsThis item works with the following types of products:
- Saw Parts
- Trim Saw Parts
- Router Parts
This part replaces obsolete part #: 846249, 438010070058
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Worked as it should
Sander is running again
Guest -
August 15, 2022
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Connector
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The cord, sleeve and pad needed replacement.
ROBERT - March 5, 2020
Tool Type
Sander
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wire cutters and crimpers
I removed the top half of the housing, replaced the cord and sleeve. Then removed the old pad and cleaned the surface. I put a small piece of very thin metal duct tape over the bearing hole. Then I sprayed a light coat of 3M high tack adhesive on the pad and reinstalled it....Job done!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch was bad,
Jonathan - December 22, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Laminate Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Crimper
Parts Used
1. Removed screw holding rear cover.
2. Removed cover.
3. Removed connector from black wire with needle nose pliers by opening crimp.
4. Disconnected wire from switch to spade using needle nose pliers.
5. Removed old switch.
6. Installed new switch in reverse order using crimping tool on new connector.
7. Plugged in to receptacle and tested switch.
2. Removed cover.
3. Removed connector from black wire with needle nose pliers by opening crimp.
4. Disconnected wire from switch to spade using needle nose pliers.
5. Removed old switch.
6. Installed new switch in reverse order using crimping tool on new connector.
7. Plugged in to receptacle and tested switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord to switch on jig saw shot.
Gerald - March 3, 2017
Tool Type
Jig saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Wire strippers, .crimper
Took the handle off, picture of internal electrical wire from pc, played New pc wires next to old ones, marked length of each color of wire(plus extra for placement in handle), the stripped each wire & paired each & applied each closed end connectors with crimmper. Stripped ground wire ,applied terminal connector & crimped it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
