Medium
30-60 minutes
It is a genuine OEM sourced component that is specially made for use with Krups expresso makers. This is the mill that grinds the coffee beans. This item provides an identical replacement for a missing or a faulty coffee mill that was installed on a new unit. Please make sure to refer to the appropriate diagram of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable materials and is sold individually.
Coffee Mil MS-0A01563
OEM part for: Krups
Part Number: MS-0A01563
$55.65
In Stock
Ships within 1 business day 
Compatibility
This Coffee Mil will fit the following 12 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Espresso Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Coffee Mil
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Krups EA 8250 Espresso/Coffee maker Grinder stopped working
David - March 28, 2016
👍 6 of 7 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Allen Wrench
Parts Used
Remove all the trays, water tank, standard stuff that comes off easily.
The hardest part was to remove the cover to get to the grinder.
There are six allen Head screws in the top (three under front metal grille, one holding the guard over the grinder, one under the grind selector. and one under the the removable grinder hopper) Lift the front of the cover carefully and work the back portion off.The front cane be carefully removed by pulling forward from the top. Be carefully as you will have to release the mid from by using a flat screw driver to release the tabs. Then unscrew from the front and bottom front. Unplug the wires connecting the front display to the electronic board on the left side of the unit. Remove the screws under the water tank. Now carefully pull the sides and back off the unit.
The grinder and electronics connections are now all accessible.Replace the grinder plug it in and reassemble.
The hardest part was to remove the cover to get to the grinder.
There are six allen Head screws in the top (three under front metal grille, one holding the guard over the grinder, one under the grind selector. and one under the the removable grinder hopper) Lift the front of the cover carefully and work the back portion off.The front cane be carefully removed by pulling forward from the top. Be carefully as you will have to release the mid from by using a flat screw driver to release the tabs. Then unscrew from the front and bottom front. Unplug the wires connecting the front display to the electronic board on the left side of the unit. Remove the screws under the water tank. Now carefully pull the sides and back off the unit.
The grinder and electronics connections are now all accessible.Replace the grinder plug it in and reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Grinder motor broken winding
Jeff - July 6, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Nutdriver, Dental pick
Parts Used
Replaced grinder assembly. Instructions on how to adjust the grinder mill would have been very helpful.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed to replace coffee mill, helps to check out YouTube video on disassembling.
David - April 7, 2021
Tool Type
Coffee Maker
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Torx screwdriver
Parts Used
The most difficult part was taking apart the Coffee maker housing. Watching a YouTube video to see how to take the housing apart is the best route to go. Replacing the coffee mill itself is very easy. Saved a couple hundred dollars by not having the repair shop do this for me. Good luck!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
