Easy
30-60 minutes
This replacement discharge chute is designed for use with Snapper riding lawn mowers. It is mounted to the side of the mower deck for the cut grass to be expelled out of. This part is made from durable plastic and it is sold individually. Please note the hardware to secure this deflector is sold separately.
Chute, Discharge 7026233YP
OEM part for: Murray, Snapper
Part Number: 7026233YP
$81.74
In Stock
Ships within 1 business day 
Compatibility
This Chute, Discharge will fit the following 458 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Lawn Tractor Parts
This part replaces obsolete part #: 7026233
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Chute, Discharge
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Annual service
Glenn - March 17, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Socket set, Wrench Set, Adjustable Wrench, Dead-blow hammer, funnel & oil catch pan
Pre & air filter - remove filter cover, remove and replace filters and replace cover.
Chute - remove chute rod end nut, drive out rod, remove old chute, align new chute, drive in rod and replace end nut.
Oil filter - remove drain plug and drain oil from crankcase (remove dipstick to allow air in for complete draining). Once drained, remove oil filter. Use oil to lubricate the filter gasket and install filter hand tight. Replace drain plug and fill crankcase with oil. With the proper oil level in the crankcase, run the engine and check for leaks.
Blade - Remove the blade mounting bolts and nuts (I find it easiest to reach the bolts through the chute cut-out in the deck - use a block of wood to prop-up the chute). Replace blade and mounting hardware (noting the proper orientation of the blade).
Chute - remove chute rod end nut, drive out rod, remove old chute, align new chute, drive in rod and replace end nut.
Oil filter - remove drain plug and drain oil from crankcase (remove dipstick to allow air in for complete draining). Once drained, remove oil filter. Use oil to lubricate the filter gasket and install filter hand tight. Replace drain plug and fill crankcase with oil. With the proper oil level in the crankcase, run the engine and check for leaks.
Blade - Remove the blade mounting bolts and nuts (I find it easiest to reach the bolts through the chute cut-out in the deck - use a block of wood to prop-up the chute). Replace blade and mounting hardware (noting the proper orientation of the blade).
Did you find this story helpful?
Thanks for voting and helping fellow customers!
lost gas tank cap
Benjamin - June 5, 2020
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, none
Parts Used
just replace it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Deck had rim damage and several holes.
William - September 14, 2019
Tool Type
Lawn Tractor
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, impact wrench
I removed the entire rail assembly from the old deck after removing the safety interlock and belt.
Then it was repeat the process in reverse taking a little longer than I had hoped. The amount of money spent on parts and the cost of buying the same mower ( less H.P.) saved me $1500.00 .
Then it was repeat the process in reverse taking a little longer than I had hoped. The amount of money spent on parts and the cost of buying the same mower ( less H.P.) saved me $1500.00 .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
grass discharge broken
joseph - July 6, 2019
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
Parts Used
1) remove the discharge from the mower
2) replace with the new discharge
3) socket set required and pliers
2) replace with the new discharge
3) socket set required and pliers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
discharge chute was damaged while getting too close to a post
Daniel - May 2, 2019
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Removed nut from rod and pulled out pin holding chute
started rod back in line with slides and replaced chute with new perfect matched chute
10 minutes tops!
started rod back in line with slides and replaced chute with new perfect matched chute
10 minutes tops!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken discharge chute.
jerry - August 17, 2017
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Wrench Set
Parts Used
Sprayed wd-40 to loosen the parts. Removed the old chute. Installed the new chute which fit perfectly. All in about 15 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Front mower deck wheel broke
Davison - August 7, 2016
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Adjustable Wrench
1. Lifted up front of tractor
2. Removed & replaced front wheel.
3. Let tractor down
4. Removed locking hinge rod for mower chute
5. Replaced chute and slipped hinge rod back into place
2. Removed & replaced front wheel.
3. Let tractor down
4. Removed locking hinge rod for mower chute
5. Replaced chute and slipped hinge rod back into place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
