The check valve attaches to the tank and is made of metal. This is a genuine Campbell Hausfeld replacement part for use in air compressors. This item is available as an individual replacement part. An adjustable wrench might be helpful during the installation of this item. It will need to be replaced if it becomes broken.
Check Valve W/push Fit CV222201SJ
OEM part for: Campbell Hausfeld
Part Number: CV222201SJ
Jump To:
Frequently Purchased Together ?
Compatibility
This Check Valve W/push Fit will fit the following 51 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Campbell Hausfeld
Show More Compatible ModelsThis item works with the following types of products:
- Compressor Parts
This part replaces obsolete part #: CV222201AJ, CV223701AJ, CV221506AJ
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Check Valve W/push Fit
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Leaky air compressor.
Tool Type
Compressor
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Adjustable Wrench, MEGALOC thread sealant; MEGATAPE (3.5 mil)
2. Applied soapy water (with small artists brush) on all fittings to determine where leaks existed.
3. Bubbles appeared in three locations: Pressure gauge fitting (the one attached to the regulator), check valve thread and nipple (that feeds the hose line fitting).
4. Oiled compressor motor bearings using a cotton cue tip with oil to get rid of squeaking that I noticed when moving the motor by hand. Squeaking is gone.
5. Removed air gauges, nipple, regulator, compressor head, check valve (and this requires removing the copper pipe that connects the air compressor to the check valve). When removing the copper pipe and head, they must be removed at the same time, in order to remove the pipe from the check valve.
6. Installed the new nipple (which was rusted). I used MEGALOC sealant when reinstalling. The sealant is rated at 2600 PIS for gas.
7. Installed the new regulator.
8. Reinstalled both pressure gauges using MEAGATAPE (3.5 MIL thick) as a sealant. The tape is rated at 300 psi max. I could have used the MAGALOC sealant but just wanted to try the tape, which worked great.
9. Reinstalled the copper tube, check valve and compressor head. It was not necessary to replace the head gaskets. Care must be taken to make note of the position of the gaskets when reinstalling. I used MEGALOC seal on the check valve. I also removed and reinstalled the nipple on the head that mates to the copper pipe using the MEGALOC sealant. I used the original ferrules on the copper pipe. Although I purchased new ferrule, I decided not to use them. The original ferrules worked.
10. Removed and reinstalled the fitting that connects to the hose. I used MAGTAPE for this.
11. All the fixes worked well. The compressor holds pressure (it's been two weeks since the fix and there is no loss of pressure).
belt broke on motor compressor motor would overheat and not shut off
Tool Type
Compressor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Adjustable Wrench, 3/4 inch pull handle
Given air compressor that was broken found brass air tube cracked
Tool Type
Compressor
Difficulty
Medium
Time
15-30 minutes
Tools Used
Adjustable Wrench
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.