This is a genuine OEM replacement part, it is sold individually. It is used on a variety of Echo Gas Powered Equipment. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem.
Carburetor A021001692
OEM part for: Echo
Part Number: A021001692
Jump To:
Frequently Purchased Together ?
Compatibility
This Carburetor will fit the following 88 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Trimmer Parts
This part replaces obsolete part #: A021001691, A021001690
Repair Videos ?
This article will guide you through the steps required to replace the steel heart of your Echo SRM-225 trimmer....
May 19, 2015
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
- 1
- 2
- 3
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bogged down during throttle, would die after a few minutes
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, T25 torx
Parts Used
To install, reinstall gasket, tighten carburetor and reinstall fuel lines, throttle cable, filter and air cleaner cover. Prime and start.
Trimmer would not start.
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
2. Removed fuel lines.
3. Removed the throttle control.
4. Installed the new carburetor.
5. Reconnected the fuel lines.
6. Re-connected the throttle control.
7. Put new fuel into the fuel tank.
8. Primed the carburetor.
9. Pulled the starter cords twice.
10. The trimmer started right up.
Carburetor was bad.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
2. Removed air filter.
3. Removed fuel lines from carburetor.
4. Removed old carburetor.
5. Installed new carburetor and fuel lines.
6. Put gas in tank and started trimmer.
String trimmer won't start
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
Needed new carburetor
Tool Type
Edger
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Sad to say my echo weed whip was 1 year old and I had to replace the carburetor!
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Star bit
Parts Used
Would run until prime bulb was empty
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Remove the fuel lines and throttle from the carb.
Install the new carb, connect the throttle and the fuel lines
Replace the air filter assembly
The plastic piece that was mounted on the Carb was broken and it held the throttle cable.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, T 25 Torx bit.
Parts Used
2. Installed the new Carb.
3. Put fuel back into the tank.
4. Primed it, gave it a couple of pulls and it started up.
5. Adjusted the idle speed as it was too fast.
Trimmer would die after starting
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Adjustable Wrench, putty knife-to take gasket off of old carburetor
Wouldn’t prime
Tool Type
Edger
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.