This genuine replacement part is designed for use with Shindaiwa and Echo gas powered backpack blowers. It is sourced from the original equipment manufacturer and it is sold individually. The purpose of the carburetor is to mix air and gas before the combustible mix goes into the engine. If the engine won't start and the tank is full of fresh fuel or if it quickly dies, the carburetor is likely the problem. Please note this durable metal body assembly is sold individually, the rubber primer bulb is included.
Carburetor Assembly Wyk-192 A021000812
OEM part for: Shindaiwa, Echo
Part Number: A021000812
Jump To:
Frequently Purchased Together ?
Compatibility
This Carburetor Assembly Wyk-192 will fit the following 45 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Blower Parts
This part replaces obsolete part #: A021000811, A021000810
Repair Videos ?
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly Wyk-192
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Choke had to be half way to run
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Allen wrench metric
Runs like new...
Would start then cut out
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Allen keys
Blower would not start
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Wrench Set, Todd bits used in power drill
Parts Used
2. Removed air intake pipe
3. Removed carb screws
4. Ensured gaskets were preserved. What I didn’t like is the carb did not come with a gasket!!!! You must order a gasket separately
5. Remove the carb
6. Move hoses one at a time and place each one on the same point on the new carb
7. Remove throttle cable from old to new carb
8. Align new carb with screws onto the motor
9. Tighten down in a ‘balanced manner’, ie a little on each screw, a little at a time
10. Replace gas tank
11. Intake air hose
12. Clean off your blower, it will loom good and work great!
carburetor went bad
Tool Type
Blower
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.