Medium
30-60 minutes
This genuine carburetor assembly is sourced from original equipment manufacturer for use with Subaru/Robin engines. Carburetor is a crucial component of a gas powered engine because it supplies a combustible mixture of gas and air needed for the engine to run. This carburetor has a metal body and it is sold individually. It is recommended to replace gaskets when replacing carburetor to ensure top performance.
You would need a wrench to complete this repair.
• Remove the cover and screws that secure carburetor
• Remove the old carburetor and install the new one
• Re-assemble and test the unit
Carburetor Asm 951-12705
OEM part for: MTD, Yard Machines
Part Number: 951-12705
$102.10
In Stock
Order within the next 9 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.52 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Carburetor Asm will fit the following 288 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 288 matching models.
288 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Craftsman
- Husky
- MTD
- Troy-Bilt
- Yard Machines
- Yard Man
This item works with the following types of products:
- Engine
- Snowblower
This part replaces obsolete part #: 951-10974A, 751-12705, 751-10974, 951-10974
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Worked exactly as expected. Easy install, started right up after.
Started right up after install, ran like new again, just in time for snow season to start back up.
Guest -
November 26, 2019
Verified Purchase
Great service in selecting and installing the right part.
The part arrived in excellent condition. It fit perfectly and was quick to install. The motor start on the first pull. the web site was very helpful in being able to pick out the right part.
Guest -
November 7, 2019
Verified Purchase
yes! Great part , carburetor
the carburetor arrived and worked as expected without any adjustment, thank you for having parts available. It would even be better if you would have an exploded diagram view with the part package. what a great online store.
Alan -
April 25, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Asm
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
I was given a snowblower that sat for two years with ethenol blended gasoline in it.
Wayne - November 15, 2015
👍 9 of 10 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
After taking the bowl off of the carberator it became clear that a new carberator was going to be needed. I just had to remove the fuel tank and control panel for access to the carberator. Swap in new carberator and reassemble. Set idle speed and my snowblower is good to go at a fraction of what a repair shop would have charged.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Getting old ND needed some TLC
Steven - November 12, 2021
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
I cleaned the Engine, changed the Oil, replaced the Spark Plug replaced the coil assembly and replaced the Carb that was in bad shape. It went pretty smooth. You just have to lay out your parts and take your time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor leaking
Paul - January 7, 2023
Tool Type
Blower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Flashlight, inspection mirror, hose pliers
Pinch off fuel line, disconnect spark plug wire, remove heat shields, and belt covers, disconnect fuel line and primer tube. Removed old carburetor, and gaskets. Replaced with new parts. Replaced covers etc. Fresh fuel and test. Works perfect.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Snow blower would not start. Fuel tank had holes, Carb bowl was rusted and full of water.
Benjamin - February 5, 2021
Tool Type
Snowblower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
1. Remove the key, choke knob, and throttle knob.
2. Remove plastic shroud over carburetor.
3. Disconnect wires to safety key.
4. Remove primer bulb hose and fuel line from carburetor. If there is gas in the tank, clamp the hose to prevent gas from pouring out.
5. Disconnect spring and linkage from carburetor and slide carburetor off the bolts noting the location of the gaskets.
6. Remove start switch for access to the tank bolt.
7. Remove the V belt housing cover between motor and blower hood.
8. Remove the 3 tank bolts.
9. Clean all the gaskets and sealing surfaces for the carburetor and begin assembling the unit.
10. Clean the spark plug and change if needed.
11. Check the oil level and fill or change as needed.
12. Start it and let it run to make sure there are no issues.
2. Remove plastic shroud over carburetor.
3. Disconnect wires to safety key.
4. Remove primer bulb hose and fuel line from carburetor. If there is gas in the tank, clamp the hose to prevent gas from pouring out.
5. Disconnect spring and linkage from carburetor and slide carburetor off the bolts noting the location of the gaskets.
6. Remove start switch for access to the tank bolt.
7. Remove the V belt housing cover between motor and blower hood.
8. Remove the 3 tank bolts.
9. Clean all the gaskets and sealing surfaces for the carburetor and begin assembling the unit.
10. Clean the spark plug and change if needed.
11. Check the oil level and fill or change as needed.
12. Start it and let it run to make sure there are no issues.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine surged up and down
Larry - October 31, 2019
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Removed all shrouds needed. Removed carburetor. Replaced gaskets and new carb. Worked great!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Had bad gas which plugged the car and Fowled the spark plug.
Robert - March 27, 2019
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Removed gas tank and cleaned it to remove all the old gas. Removed the carburetor and installed new one and replaced the spark plug. All parts was purchased from replacement parts. I hope you keep carrying parts for the items I have.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Poor winter storage rusted tank and damaged carb.
Tom - January 30, 2019
Tool Type
Snowblower
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Adjustable Wrench
I started by watching 2 You Tube videos on carb replacement, it was the most involved. Many parts had to come off and in a special order for repair. The Parts ordered fit perfect and all were as listed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carb was gunked up
keith - March 27, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
1-2 hours
Tools Used
Pliers, Socket set
Replaced the old carb with the new one. The engine runs great now!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Snow blower would not start.
Tara - November 27, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
Parts Used
Took the old carb off and put the new carb on. Started right up.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
