Medium
15-30 minutes
This genuine replacement part is designed for use with Shindaiwa gas powered equipment. It is sourced from the original equipment manufacturer and it is sold individually. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem.
Carburetor Assembly (non Epa C A021002190
OEM part for: Shindaiwa
Part Number: A021002190
$65.67
In Stock
Order within the next 10 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Carburetor Assembly (non Epa C will fit the following 14 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 14 of 14 matching models.
Shindaiwa
Show More Compatible Models14 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Shindaiwa
This item works with the following types of products:
- Edger
- Trimmer
This part replaces obsolete part #: 20016-81021
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fixed
Easy to install and started 2nd pull.
Jeff -
October 5, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly (non Epa C
Is this an OEM Walbro CARBURETOR Carb WYL-19?
Alex
for model number T230
asked on 2022-11-23
Hello Alex, Thank you for the question. All the parts we sell are OEM brand new parts direct from the manufacture. We do not sell used or aftermarket. We hope this helps!
eReplacementParts Team November 23, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Trimmer will not start
David - March 24, 2023
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Socket set, Vise grip pliers
Parts Used
Remove old carburetor and replace with new carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine was running rough. Would start and idle but shut off when throttle was pulled.
Jay - July 19, 2022
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Using needle nose pliers I carefully removed hoses from carburetor noting which hose went where. (Engine cover will need to be removed. Mine was already off.)
2. Removed air filter cover and (2) screws and plate holding carburetor on.
3. Carefully remove carburetor and disconnect from throttle cable.
4. Carefully wipe off old gasket making sure not to damage it. If it comes off take note how because it only fits one way or the carburetor won’t work.
5. Reassembled in reverse order and installed new air filter, new air filter cover and new recoil starter assembly. Started my T230 and it came to life and ran just like it is supposed to.
Now I’m waiting for the new fuel tank to get here because the old one is leaking and apparently I forgot to order a new one when I ordered the carb.
2. Removed air filter cover and (2) screws and plate holding carburetor on.
3. Carefully remove carburetor and disconnect from throttle cable.
4. Carefully wipe off old gasket making sure not to damage it. If it comes off take note how because it only fits one way or the carburetor won’t work.
5. Reassembled in reverse order and installed new air filter, new air filter cover and new recoil starter assembly. Started my T230 and it came to life and ran just like it is supposed to.
Now I’m waiting for the new fuel tank to get here because the old one is leaking and apparently I forgot to order a new one when I ordered the carb.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reoccurring Carburetor problems
Blue - May 23, 2019
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, None
Parts Used
Removed old carburetor (two screws and fuel lines and gasket). Replaced gasket and attached new carburetor and reattached fuel lines. Primed using bulb, choked and started.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hard starting - erratic running
Alan - September 29, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
This was the finale step in my repair job on my Shindaiwa trimmer. First I ordered new starter rope assembly, spark plug, and air filter. Ordering was easy with eReplacementParts.com and unlike many places - the ordering was easy - prices reasonable - especially shipping! Living in Hawaii, this is usually a real issue. Cleaned everything really well including carburetor and tank and also replaced fuel filter - still ran erratic. Ordered a new carb - got it in a few days - runs like new!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
