Easy
Less than 15 minutes
This is a genuine manufacturer-supplied replacement which is specially designed for use with DeWALT and Black and Decker saws. The purpose of a brush is to conduct the current in an electric motor that powers the tool. Unfortunately, the material will wear out and it may cause intermittent performance eventually requiring a replacement. Keep in mind this high-quality brush is sold individually When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Not sure if your carbon brush is causing your motor problems? See our power tool repair article: Whodunnit? The brushes or the switch? Whodunnit? The brushes or the switch?" />Carbon Brush 145323-06
OEM part for: DeWALT
Part Number: 145323-06
$8.86
In Stock
Order within the next 12 hours and your part ships today! 
Jump To:
Product Description ?
- Dimensions
- Length 3/4 Inch
- Width 1/2 Inch
- Thickness 1/4 Inch Sold Individually
- Classification: Part
- Weight: 0.01 lbs.
- Also Known As: Motor Brush
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Carbon Brush will fit the following 113 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
DeWALT
Show More Compatible ModelsThis item works with the following types of products:
- Miter Saw Parts
- Saw Parts
This part replaces obsolete part #: 145323-03, 145323-02
Repair Videos ?
Watch the Repair Video for
Carbon Brush
Articles:
|
Step-by-step instructions for removing and installing the motor brushes on your DeWALT circular saw....
June 13, 2018
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
41
4 stars
3
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
worked as expected and arrived in a timely manor
Parts fit perfect and worked as expected.
Guest -
May 2, 2024
Verified Purchase
Fixed my chopsaw
They had the brushes, the customer service to lead me to the correct part and I saved a few hundred bucks by doing it myself.
kevin -
October 4, 2023
Verified Purchase
great service great parts
the brushes fit well. kept my miter box running for a small cost. without
the brushes the saw was worthless
Guest -
August 15, 2023
Verified Purchase
Easy Repair
The brushes arrived very quick easy to install and made my saw run like new again. I would highly recommend Replacement Parts
Guest -
May 16, 2023
Verified Purchase
worked as expected
The parts were the correct parts needed for my miter saw and now it works perfectly
Guest -
May 5, 2023
Verified Purchase
Ordering process with ereplacement parts.com
Spoke with representative and was very satisfied with the amount of time and effort put into finding the right part I needed.
Part was ordered, I received the correct part right on schedule. Thank you, very satisfied
Guest -
December 28, 2022
Verified Purchase
The Best
They always have what I need.
Guest -
November 30, 2022
Verified Purchase
Replacement part
Part matched exactly to what I needed for my repair.
Recommended for others to use.
Kenneth -
June 1, 2022
Verified Purchase
Best parts store I’ve found
Great service quick fast and easy
Michael -
February 22, 2022
Verified Purchase
saw repair
very fast service part i needed to get my saw running
Guest -
February 21, 2022
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carbon Brush
I just need a cap for the one brush for the motor, does this come with the Brushes?
Greg
for model number DW744
asked on 2022-07-02
Hi Greg,
Thank you for your question. The carbon brush listed for your model includes the cap and the brush. The part number listed under your model number for the carbon brush is 145323-06. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 02, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replace brushes
Jim - March 30, 2016
👍 9 of 12 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Remove brush caps with a screwdriver, then remove the old brushes. Install the new brushes, then replace the brush caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade brake sluggish
Thomas - March 8, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Simply remove brush covers with a screw driver remove old brush assemblies blow out all dust, install new brushes and secure by reinstalling brush covers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Circular saw ran yet but weak, lot of sparks coming from where the 2 brushes met the armature. New brushes much more power n less sparks now.
Stephen - April 30, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Took the two brush caps off, that someone had tried to, or had taken off before with a screw driver that was to narrow. Got the caps off, replaced the brushes I bought easily n cheaply on e replacement parts.com. put the new caps on. The saw looks n runs much better than it did.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw had failed to start and the best solution for this problem was to replace the old brushes.
Doug - March 24, 2016
👍 4 of 6 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I was able to purchase the replacement brushes and springs at ereplacementparts.com and I was pleased with the ease of installation and moreover by the exceptional follow-up and delivery time!! All you have to do is remove the brush caps, remove the old brushes and install the new brushes , then screw the brush caps back on.
Kudos to you all and I have already sent you several customers!!! Now the saw is like new and I am back in business thanks to the parts and speed of delivery!
Kudos to you all and I have already sent you several customers!!! Now the saw is like new and I am back in business thanks to the parts and speed of delivery!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn brushes.
Michael - August 2, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Replaced the old brushes with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor quit due to worn brushes
Paul - July 28, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed the brush caps, removed the old brushes, installed the new brushes, replaced the brush caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Brushes wore out after 18 years
Barry - July 9, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed brush caps. Removed old brushes. Installed new brushes. Installed brush caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My DeWalt 744 table saw could barely rip a piece of pine after years of great service. I suspected brushes but was not sure.
Ken - September 17, 2018
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Watched a You tube video on carbon brush replacement. Followed instructions and used eReplacement Parts to effect repair. Saw working great again. Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Smoke coming from armature of table saw
Donald - June 21, 2018
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Unscrewed carbon brush cap from armature cover.
2. Removed old carbon brushes.
3. Inserted new carbon brushes.
4. Screwed the caps back onto the armature cover.
2. Removed old carbon brushes.
3. Inserted new carbon brushes.
4. Screwed the caps back onto the armature cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sparks
Steve - June 20, 2018
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed cap, pulled out brush, pushed in brush, screwed on caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
