This is an original Dremel replacement part manufactured for use with scroll saws. Brushes are wear items because they are in contact with the spinning armature of the motor when the saw is in use. Therefore, the brushes will eventually wear down requiring replacement.
*These are sold individually
Brush And Spring 2615296770
OEM part for: Dremel, Bosch
Part Number: 2615296770
![](/images2/icon-shiptruck.png)
![Dremel Dremel](images/15440_white.png)
![Bosch Bosch](images/128_white.png)
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Compatibility
This Brush And Spring will fit the following 3 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Saw Parts
- Scroll Saw Parts
Repair Videos ?
This article describes the differences between power switch and carbon brush failure symptoms....
September 18, 2009
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
![photo of team member](/images2/portrait-mark.png)
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush And Spring
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Scroll saw did not run.
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Brushes stuck after being under water 57" due to Hurricane Harvey
Tool Type
Scroll Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Power Drill
Parts Used
2. Used a pick to remove the broken pieces.
3. Installed the new.
Motor would not turn
Tool Type
Scroll Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, 600 grit sandpaper taped to Q-tip
Parts Used
2. Ordered new brushes set from eReplacement Parts. Cleaned crushed carbon from armature.
4. After about a week I received one brush from eReplacement Parts. Was surprised that I did not receive a pair. Went back to the eReplacement Parts web site and read the note beside the asterisk that says the order was for one part only. Decided not to complain, filed the experience under "buyer beware".
5. Since the one brush that was pulled free appeared to be in good shape, I decided to try and use it and the new brush received from eReplacement Parts. I installed them and applied power but the motor still would not turn. Since I had received only one new brush from eReplacement Parts, at this point I did not know if I still had a bad brush but decided to troubleshoot further before ordering a new brush SET from a better source.
6. With brushes removed, I checked DC voltage on the armature - it was about 110 volts.
7. Having noticed that some of the armature segments were discolored, I cleaned the armature using 600 grit sandpaper taped to a Q-tip and DeoxIT contact cleaner.
8. I then re-installed and new brushes and re-applied power. It worked.
Scroll saw sat for years, brushes froze in place-- dremel workbench type,
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.