eReplacementParts.com
877-346-4815
Milwaukee Parts
Repair Parts Home
  
Power Tool Parts
  
Milwaukee Parts
  22-18-0730 Carbon Brush

Carbon Brush 22-18-0730

OEM part for: Milwaukee

Part Number: 22-18-0730


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 9 hours and your part ships today!
Easy 15-30 minutes (10 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this fit my product?

Product Description ?

Genuine Milwaukee replacement part.
Includes 1 Carbon Brush with wire lead and brush spring attached.
2 of these brushes are need for the tools listed below.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This Carbon Brush will fit the following 58 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Grinder Parts
  • Sander Parts
  • Circular Saw Parts
  • Saw Parts

This part replaces obsolete part #: 22-18-0145

Customer Part Reviews ?

4.8
Average Rating (out of 5):
6 Reviews
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great fit.
    The old grinder is back to work!! New brushes went in very easily.
    john - January 18, 2022 Verified Purchase
    Fit just right.
    Was right fit...will definitely buy again
    Guest - May 29, 2021 Verified Purchase
    SIMPLE REPAIR
    HAD A GRINDER UP IN LESS THAN FIVE MIN.
    CHRIS - September 11, 2020 Verified Purchase
    Easy easy
    Parts were in great condition received very fast easy to install works great.
    David - September 4, 2020 Verified Purchase
    Always easy to find the parts I need, and an easy transaction
    The part was exactly what we needed.
    Gordon - May 22, 2019 Verified Purchase
    Fast service!
    Great, fast service!
    David - September 20, 2023 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (10 rated repairs)?

    Brushes wore out

    Dean - April 14, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the brush covers with a screwdriver. Remove the old brushes, then install the new ones. Then replaced the brush cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    SWITCH FAILED CLOSED/ UNIT RAN ALL THE TIME

    CHRIS - October 16, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    REMOVED HANDLE/INSTALLED NEW ACCORDING TO NEW WIRING DIAGRAM
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    motor brushes worn down

    Doug - May 6, 2019
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    removed brush retainer caps, removed old brush, installed new brush, re-installed brush
    retainer cap.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brush wire broke

    Tim - May 2, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Removed the brush holder cap remove old brush and install new one
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    switch went bad handle was cracked

    Roy - February 18, 2019
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Adjustable Wrench, brass hammer and Punch

    removed handle and brushes. took bearings out and replaced. put in new brushes and installed new handle switch assembly .
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No power and it did not sound right

    Lared - January 17, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    removed the top plastic cap and then replaced the Brush. Very easy to do and cheap.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes were worn out

    darrel - March 12, 2018
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Unscrewed the cover housing for the brushes.
    2. Removed the old brushes
    3. Inserted the new brushes.
    4. Screwed the cover housing for the brushes back on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes worn down more than half way

    Chris - February 18, 2018
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed brush caps and pulled out worn brushes and replaced with fresh new brushes!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn out brushes.

    Colin - September 9, 2017
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the old ones and replaced with the new brushes.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Grinder would not shut off.

    Steve - June 19, 2017
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    The switch kit includes installation instructions and a wiring diagram. Made it easy. Then I just removed the brush caps, and removed the old brushes and installed the new ones, then screwed the brush caps back on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal